Cisco Systems 2500 Series, CIVS-IPC-2500 manual IP Filter Window, Eapol Window

Page 36

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

IP Filter Window

The IP Filter window provides options for controlling access to the IP camera by designating a list of IP addresses that can access the IP camera and a list of IP addresses that cannot access the IP camera.

To display the IP Filter window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-6, click Setup, then click IP Filter.

If you change any options in the IP Filter window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-5describes the options in the IP Filter window.

Table 3-5

IP Filter Window Options

 

 

 

Option

 

Description

 

 

 

Options

 

Choose the option that specifies how to control IP addresses from which the

 

 

IP camera can be accessed:

 

 

• Disable—Do not use the IP address filtering feature. In this case, the IP

 

 

camera can be accessed from a device with any IP address.

 

 

• Enable and deny the following IP address—Lets you designate one or

 

 

more IP addresses or range of IP addresses that cannot access the IP

 

 

camera. All other IP addresses can access the IP camera.

 

 

• Enable and allow the following IP address—Lets you designate one

 

 

or more IP addresses or range of IP addresses that can access the IP

 

 

camera. All other IP addresses cannot access the IP camera.

 

 

 

Single/Range

 

If you enable IP address filtering, choose either of the following options

 

 

from as many drop-down lists as needed:

 

 

• Single—Enter an IP address that is denied or allowed access to the IP

 

 

camera, depending on the Options setting.

 

 

• Range—Enter a range of IP address that is denied or allowed access to

 

 

the IP camera, depending on the Options setting.

 

 

 

EAPOL Window

The EAPOL window provides options for configuring Extensible Authentication Protocol Over LANs (EAPOL). This protocol is used to authenticate and control user traffic in an 802.1x network.

To display the EAPOL window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-6, click Setup, then click EAPOL.

If you change any options in the EAPOL window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-5describes the options in the EAPOL window.

 

Cisco Video Surveillance 2500 Series IP Camera User Guide

3-14

OL-19273-02

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Cisco Video Surveillance 2500 Series IP Camera User Guide Americas HeadquartersCisco Video Surveillance 2500 Series IP Camera User Guide N T E N T S Using the IP Camera with Cisco VSM Overview OrganizationCisco Video Surveillance 2500 Series IP Camera User Guide Features Features, IP Camera Physical Details,IP Camera Physical Details Basic Setup Window section on Back Focus on the IP Camera section onDescribed in the Resetting the IP Camera section on Rear of IP CameraSide of IP Camera DC Auto Iris Lens Connector Pinouts Package ContentsInstalling the Cisco Video Surveillance IP Camera Getting StartedAction Explanation Action Explanation Initial Setup of the IP Camera, page 2-5, then Configuring and Managing the IP Camera. At aPerforming the Initial Setup of the IP Camera ProcedureAccessing the IP Camera Windows Protocol//ipaddressHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.52 Http//203.70.212.521024Adjusting Back Focus on the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksInitial Setup of the IP Camera Section onCleaning the IP Camera Configuring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference EapolSee the Alarm I/O Ports Preset PositionsSee the Video Window section See the Audio Window sectionNavigating the Configuration Windows See the Syslog & Log WindowSee the Video Log Window Setup Windows Basic Setup WindowSnmp Device Settings Option DescriptionWireless Setup Window Network SettingsWireless Settings Edit Security SettingsHide Security Settings WEP Security Mode OptionsWPA/WPA2 Personal Mode Options AESWPA/WPA2 Enterprise Mode Options Edit Region SettingsHide Region Settings Advanced Setup Window OptionBonjour HTTP/HTTPS QoS DscpIP Filter Window Eapol WindowAdministration Windows Users Window, Maintenance Window, Firmware Window,EAP-FAST Options Administrator Users WindowUser List Maintenance Window Passwords after saving the configuration file, be aware that Audio/Video Windows Firmware WindowVideo Window Video Window, Audio Window,Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for MPEG-4 SettingsPAL Mjpeg Settings Video Adjustment PAL/50 HzOptions Day/Night VisionAudio Window Home Window Controls section on Duplex Talk and ListenChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenSecurity Windows Product Process WindowInitialization Window Complexity WindowUsers Window section on HttpApplications Windows Mail & FTP WindowDescribed in the Basic Setup Window section on Mail SetupPrimary Smtp Server Secondary Smtp ServerMotion Detection Window Mail BodyPrimary FTP Secondary FTPEvent Window Event Schedule New ScheduleClear button Trigger EventMessages, see the Mail & FTP Window section on AttachmentSnmp Window Alarm I/O Ports Window Alarm Input SettingsAlarm Output Settings Manual Control SettingsPort Settings Preset PositionPTZ RS-485 Window Preset Positions Window Patrol SequenceZoom In button Zoom Out buttonStatus Windows Focus Far buttonFocus Near button Information, see the Basic Setup Window section on More information, see the Basic Setup Window section onSystem Window Audio/Video WindowAudio Setting WirelessNetwork Window NetworkSyslog & Log Window Local LogSys Log Server Log ListMessage Explanation System log messagesAddress Address1 Port1 Address2 Port2 , User Video Log Window FTP log messagesSmtp log messages Delete button Delete All buttonOL-19273-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Home Window Controls Control DescriptionIP camera controls For related information, see the Video Window section onInformation, see the PTZ RS-485 Window section on Video display and audio controlsSave Enabling audio, see the Audio Window section onAccessing the Primary MPEG-4 Stream by using VLC Player Viewing Video through Third-Party Devices or SoftwareRtsp//ipaddress/img/media.sav Http//ipaddress/img/video.asfAccessing the Secondary MPEG-4 Stream by using VLC Player Accessing the Mjpeg Stream by using VLC PlayerRtsp//ipaddress/img/media2.sav Http//ipaddress/img/video2.asfCisco Video Surveillance 2500 Series IP Camera User Guide Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-19273-02 D E IN-1IN-2 EAP-FAST IN-3Https IN-4LED SmtpIN-5 See PTZ IN-6PTZ IN-7IN-8 WEP IN-9IN-10
Related manuals
Manual 82 pages 45.48 Kb Manual 14 pages 34.66 Kb Manual 12 pages 10.86 Kb

CIVS-IPC-2500, 2500 Series specifications

The Cisco Systems 2500 Series routers are a series of versatile, feature-rich networking devices designed to address the needs of various enterprises and small to medium-sized businesses. Released in the early 1990s, the 2500 Series quickly became a backbone solution for organizations seeking reliable and efficient networking capabilities.

One of the defining characteristics of the Cisco 2500 Series is its modular architecture, which allows businesses to customize their routers based on specific networking needs. This modularity accommodates various interface cards, enabling the integration of different protocols and connection types, including serial, Ethernet, and WAN interfaces. As a result, organizations can tailor their routers to support diverse applications while ensuring optimal performance.

The Cisco 2500 Series supports several advanced routing protocols, including RIP, OSPF, EIGRP, and BGP. This support provides flexibility for network design and ensures that users can implement scalable solutions as their business grows. Moreover, the routers come equipped with robust security features, including access control lists (ACLs) and support for VPNs, making them suitable for organizations that require a secure network environment.

A notable feature of the Cisco 2500 Series is its support for Quality of Service (QoS). This functionality allows organizations to prioritize certain types of traffic, ensuring that critical applications, such as VoIP or video conferencing, receive the necessary bandwidth and minimal latency. This is particularly beneficial for businesses that rely on real-time communications and need to maintain high levels of service quality.

Additionally, the implementation of Cisco’s internetworking technologies, such as IP and frame relay, enhances the overall performance and versatility of the 2500 Series routers. These technologies enable efficient data transmission and improve network reliability, which is essential for organizations with complex networking requirements.

In summary, the Cisco Systems 2500 Series routers are known for their modular design, support for multiple routing protocols, robust security features, and advanced QoS capabilities. Their ability to adapt to different networking environments makes them an ideal choice for businesses looking to enhance their connectivity and streamline their operations. Even decades after their introduction, the 2500 Series remains a relevant player in the networking market, demonstrating Cisco's commitment to providing effective solutions for diverse industries.
Top Page Image Contents