Cisco Systems 5011, 5010 manual

Page 2

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by using one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide © 2010, 2011 Cisco Systems, Inc. All rights reserved.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Americas Headquarters Page N T E N T S Unicast Profile OL-22669-02 Preface Viii A P T E R ModelsGetting Started Parts List Product OverviewCamera Connections and Features Top View Product Label Installation In-Ceiling InstallationPin DC AID Auto Iris Lens Positioning the Camera Surface Installation Surface Back Box Installation Positioning the Camera Dome Liner and Lower Dome Installation Installing the Dome LinerAligning the Lower Dome with Camera Service Cable Qty DescriptionWiring Cat5 or Cat6 CableVAC Connector Single Camera WiringAlarm and Relay Connector Multiple Camera WiringSupervised Alarms Connecting a Relay DeviceConnecting Alarms Unsupervised Alarms Supervised Alarm ConditionsAlarm Connections 19 Unsupervised Alarm ConditionsOL-22669-02 Camera Configuration Sequence Minimum System RequirementsAccessing the IP Camera Logging on to the CameraLive Video Live Video Page IconsSelecting a Stream Unicast Primary Stream and Secondary StreamQuickView Stream Displaying Video in the Multiscreen View SettingsTaking a Snapshot Information Settings Accessing the Camera MenusGeneral Settings System TabConfiguring the Time Settings Customizing the Appearance of the Text OverlayNetwork Tab Rebooting the CameraRestoring All Camera Defaults Generating a System LogTurning On Dhcp General Network SettingsChanging the Hostname Turning Off Dhcp General Imaging SettingsImaging Tab Tone Map Settings Exposure SettingsFocus Settings White Balance SettingsConfiguring the Orientation of the Scene Changing the Digital Processing Settings Digital ProcessingSelecting Auto Exposure Settings Auto ExposureDay Night Settings, Selecting Manual Exposure Settings Manual ExposureDay Night Manual Mode Day Night SettingsDay Night Auto Mode Day Night Auto and Manual ModesConfiguring Auto Focus Settings Configuring Manual Focus Settings Manual FocusSetting Tone Map Options Selecting Auto White Balance Settings Auto White BalanceSelecting Manual White Balance Settings 10 Manual White BalanceTurning On Window Blanking Turing Off Window BlankingStreams Tab Video PresetsVideo Configuration Deleting a Window Blanking AreaSelecting a Video Preset Configuration 12 Select Video Preset ConfigurationConfiguring a Custom Video Stream Configuration 13 Custom Video Stream ConfigurationCompression Standards Available Camera ResolutionQuality of Service for Differentiated Services Code Point Image RateRate Control ProfileUsers Users and Groups TabAdvance Sharpening GroupsIncludes default accounts for the following groups Creating a New UserEditing a User Deleting a UserDeleting a Group Creating a New GroupEditing a Group General Settings for Users and Groups Setting the Camera to NodeSources Setting the Camera to MixedEvents Tab HandlersCreating an Alarm Event Source SourcesEditing an Event Source Creating a Timer Event SourceCreating a System Event Source Deleting an Event SourceHandlers Creating an Event Handler Send EmailCreating an Event Handler Write Jpeg to SD Card Creating an Event Handler Upload Jpeg to FTP Server Creating an Event Handler Open/Close RelayEditing an Event Handler Deleting an Event HandlerLog Off Menu Example Handler Filter SetupHelp Menu Specifications GeneralPhysical MechanicalEnvironmental VideoSpecifications OL-22669-02

5011, 5010 specifications

Cisco Systems is a leader in networking technology, providing robust solutions for businesses worldwide. Among its many offerings, the Cisco 5010 and 5011 models stand out as powerful devices designed to address the needs of modern data centers and enterprises requiring reliable and high-performance networking solutions.

The Cisco 5010 is a fixed-configuration switch that combines advanced features suitable for small to medium-sized businesses. It supports a range of Ethernet and wireless technologies, allowing seamless integration into various network infrastructures. With a capacity for Layer 2 and Layer 3 switching, the 5010 facilitates efficient data routing and switching, ensuring optimal performance for diverse applications.

On the other hand, the Cisco 5011 builds upon the 5010's capabilities, offering enhanced features and scalability. It is designed for organizations that demand higher performance and advanced networking capabilities. This model supports more VLANs and can handle increased traffic loads, making it suitable for larger enterprises or data centers.

One of the key features of both models is Cisco's advanced security protocols. They provide comprehensive protection against unauthorized access and network threats, ensuring that sensitive information remains secure. The switches also support segmentation and access control lists (ACLs), allowing administrators to manage network traffic effectively.

Both the 5010 and 5011 models are equipped with Cisco's innovative IOS software, providing users with a familiar interface for configuration and management. This software allows for automation of routine tasks, reducing administrative overhead and minimizing potential errors.

In terms of performance, both switches are built to handle high-speed connectivity, supporting multiple gigabit interfaces. They also feature advanced Quality of Service (QoS) mechanisms, which prioritize critical network traffic and maintain high performance during peak usage times. The support for Power over Ethernet (PoE) allows businesses to power devices like IP phones and access points directly through the switch, simplifying infrastructure requirements.

Scalability is another important characteristic of the Cisco 5010 and 5011. They can accommodate growth in network size and complexity without compromising performance, making them future-proof investments for enterprises.

In conclusion, the Cisco 5010 and 5011 switches are exemplary products that illustrate Cisco's commitment to delivering high-quality networking solutions. With their advanced features, robust security, scalability, and high performance, they cater to the needs of modern businesses looking to enhance their connectivity and operational efficiency.
Top Page Image Contents