Cisco Systems 5010, 5011 manual Configuring Auto Focus Settings

Page 47

Chapter 3 Operation

Imaging Tab

Configuring Auto Focus Settings

Figure 3-6

Auto Focus Page

Step 1 Place your mouse pointer over the Imaging tab.

Step 2 Select Focus from the drop-down menu.

Step 3 Select the Auto mode.

Step 4 Set the Temperature Change Refocus setting. The camera is programmed to run a quick automatic focus sequence when the internal temperature sensor of the camera detects an environmental temperature change of 41°F (5°C). This focus sequence adjusts the center focal point of the scene to maintain optimal focus. The default setting is On; select Off to turn off this setting.

Step 5 Set the Day/Night Switch Refocus setting. The default setting for the Day/Night Switch Refocus is Off. Select On if the camera’s focal length is greater than ~25 mm or the night scene uses mostly IR lighting. The best method to determine if the day/night refocus should be enabled is to test the camera with the daytime light conditions, and then test it again with the nighttime light conditions.

When enabled (On) this setting refocuses the camera when the camera changes from day mode (color) to night mode (black-white) or vice versa. For example, if the camera changes from day mode to night mode, the imager automatically adjusts the back focus for the change in light.

Step 6 If required, use one of the following buttons to adjust the focus:

•Full Range Auto-Focus:The camera starts a full-range search to find the optimal focal point for the scene.

•Quick Auto-Focus:The camera searches for the optimal focal point in a limited range.

•Factory Defaults: The camera resets the auto focus to the factory default setting.

 

 

Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide

 

 

 

 

 

 

OL-22669-02

 

 

3-19

 

 

 

 

 

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Americas Headquarters Page N T E N T S Unicast Profile OL-22669-02 Preface Viii A P T E R ModelsGetting Started Product Overview Parts ListCamera Connections and Features Top View Product Label In-Ceiling Installation InstallationPin DC AID Auto Iris Lens Positioning the Camera Surface Installation Surface Back Box Installation Positioning the Camera Installing the Dome Liner Dome Liner and Lower Dome InstallationAligning the Lower Dome with Camera Qty Description Service CableCat5 or Cat6 Cable WiringSingle Camera Wiring VAC ConnectorMultiple Camera Wiring Alarm and Relay ConnectorSupervised Alarms Connecting a Relay DeviceConnecting Alarms Supervised Alarm Conditions Unsupervised Alarms19 Unsupervised Alarm Conditions Alarm ConnectionsOL-22669-02 Minimum System Requirements Camera Configuration SequenceLogging on to the Camera Accessing the IP CameraLive Video Page Icons Live VideoSelecting a Stream Unicast Primary Stream and Secondary StreamQuickView Stream Displaying Video in the Multiscreen View SettingsTaking a Snapshot System Tab Accessing the Camera MenusGeneral Settings Information SettingsCustomizing the Appearance of the Text Overlay Configuring the Time SettingsGenerating a System Log Rebooting the CameraRestoring All Camera Defaults Network TabTurning On Dhcp General Network SettingsChanging the Hostname Turning Off Dhcp General Imaging SettingsImaging Tab White Balance Settings Exposure SettingsFocus Settings Tone Map SettingsConfiguring the Orientation of the Scene Digital Processing Changing the Digital Processing SettingsAuto Exposure Selecting Auto Exposure SettingsDay Night Settings, Manual Exposure Selecting Manual Exposure SettingsDay Night Auto and Manual Modes Day Night SettingsDay Night Auto Mode Day Night Manual ModeConfiguring Auto Focus Settings Manual Focus Configuring Manual Focus SettingsSetting Tone Map Options Auto White Balance Selecting Auto White Balance Settings10 Manual White Balance Selecting Manual White Balance SettingsTuring Off Window Blanking Turning On Window BlankingDeleting a Window Blanking Area Video PresetsVideo Configuration Streams Tab12 Select Video Preset Configuration Selecting a Video Preset Configuration13 Custom Video Stream Configuration Configuring a Custom Video Stream ConfigurationImage Rate Available Camera ResolutionQuality of Service for Differentiated Services Code Point Compression StandardsProfile Rate ControlGroups Users and Groups TabAdvance Sharpening UsersCreating a New User Includes default accounts for the following groupsDeleting a User Editing a UserDeleting a Group Creating a New GroupEditing a Group Setting the Camera to Node General Settings for Users and GroupsHandlers Setting the Camera to MixedEvents Tab SourcesSources Creating an Alarm Event SourceDeleting an Event Source Creating a Timer Event SourceCreating a System Event Source Editing an Event SourceCreating an Event Handler Send Email HandlersCreating an Event Handler Write Jpeg to SD Card Creating an Event Handler Open/Close Relay Creating an Event Handler Upload Jpeg to FTP ServerDeleting an Event Handler Editing an Event HandlerLog Off Menu Example Handler Filter SetupHelp Menu General SpecificationsVideo MechanicalEnvironmental PhysicalSpecifications OL-22669-02

5011, 5010 specifications

Cisco Systems is a leader in networking technology, providing robust solutions for businesses worldwide. Among its many offerings, the Cisco 5010 and 5011 models stand out as powerful devices designed to address the needs of modern data centers and enterprises requiring reliable and high-performance networking solutions.

The Cisco 5010 is a fixed-configuration switch that combines advanced features suitable for small to medium-sized businesses. It supports a range of Ethernet and wireless technologies, allowing seamless integration into various network infrastructures. With a capacity for Layer 2 and Layer 3 switching, the 5010 facilitates efficient data routing and switching, ensuring optimal performance for diverse applications.

On the other hand, the Cisco 5011 builds upon the 5010's capabilities, offering enhanced features and scalability. It is designed for organizations that demand higher performance and advanced networking capabilities. This model supports more VLANs and can handle increased traffic loads, making it suitable for larger enterprises or data centers.

One of the key features of both models is Cisco's advanced security protocols. They provide comprehensive protection against unauthorized access and network threats, ensuring that sensitive information remains secure. The switches also support segmentation and access control lists (ACLs), allowing administrators to manage network traffic effectively.

Both the 5010 and 5011 models are equipped with Cisco's innovative IOS software, providing users with a familiar interface for configuration and management. This software allows for automation of routine tasks, reducing administrative overhead and minimizing potential errors.

In terms of performance, both switches are built to handle high-speed connectivity, supporting multiple gigabit interfaces. They also feature advanced Quality of Service (QoS) mechanisms, which prioritize critical network traffic and maintain high performance during peak usage times. The support for Power over Ethernet (PoE) allows businesses to power devices like IP phones and access points directly through the switch, simplifying infrastructure requirements.

Scalability is another important characteristic of the Cisco 5010 and 5011. They can accommodate growth in network size and complexity without compromising performance, making them future-proof investments for enterprises.

In conclusion, the Cisco 5010 and 5011 switches are exemplary products that illustrate Cisco's commitment to delivering high-quality networking solutions. With their advanced features, robust security, scalability, and high performance, they cater to the needs of modern businesses looking to enhance their connectivity and operational efficiency.
Top Page Image Contents