Cisco Systems 5010, 5011 manual Imaging Tab, Turning Off Dhcp, General Imaging Settings

Page 39

Chapter 3 Operation

Imaging Tab

Note If the camera is not connected to a DHCP server but DHCP is set to On, the default IP address 192.168.0.20 on subnet mask 255.255.255.0 is automatically assigned to the camera. After the first camera is connected and assigned the default IP address, the system will automatically look for other cameras on the auto IP address system and assign IP addresses in sequential order as required. For example if three cameras are connected to a network without a DHCP server, the first camera will be assigned address 192.168.0.20, the second camera will be assigned address 192.168.0.21, and the third camera will be assigned address 192.168.0.22. Contact your network administrator to avoid network conflicts before setting/changing the camera's IP address.

Turning Off DHCP

Warning Contact your network administrator to avoid any network conflicts before setting or changing the IP address of the device.

Step 1 Place your mouse pointer over the Network tab.

Step 2 Select General from the drop-down menu.

Step 3 Select the Off option for the Dynamic Host Configuration Protocol (DHCP).

Step 4 Change the following network settings as required:

•IP Address: The address of the camera connected to the network.

•Subnet Mask: The address that determines the IP network that the camera is connected to (relative to its address).

•Gateway: The router that accesses other networks.

•DNS Servers: The addresses of the dedicated servers that translate the names for Web sites and hostnames into numeric IP addresses.

Step 5 Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

Imaging Tab

Use the Imaging tab to change the camera’s general image settings, adjust the camera exposure, program the focus mechanism, adjust the tone map settings to increase scene detail, tune the white balance settings for scenes with fluctuating lighting conditions, or define window blanking privacy areas.

General Imaging Settings

General imaging settings include adjustments for camera orientation and digital processing. The Orientation settings reconfigure the image 180 degrees horizontally and 180 degrees vertically. Use these settings when installing the camera in an inverted position. If the orientation is not adjusted, the image will display upside down and mirrored.

 

 

Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide

 

 

 

 

 

 

OL-22669-02

 

 

3-11

 

 

 

 

 

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Americas Headquarters Page N T E N T S Unicast Profile OL-22669-02 Preface Viii Models Getting StartedA P T E R Product Overview Parts ListCamera Connections and Features Top View Product Label In-Ceiling Installation InstallationPin DC AID Auto Iris Lens Positioning the Camera Surface Installation Surface Back Box Installation Positioning the Camera Installing the Dome Liner Dome Liner and Lower Dome InstallationAligning the Lower Dome with Camera Qty Description Service CableCat5 or Cat6 Cable WiringSingle Camera Wiring VAC ConnectorMultiple Camera Wiring Alarm and Relay ConnectorConnecting a Relay Device Connecting AlarmsSupervised Alarms Supervised Alarm Conditions Unsupervised Alarms19 Unsupervised Alarm Conditions Alarm ConnectionsOL-22669-02 Minimum System Requirements Camera Configuration SequenceLogging on to the Camera Accessing the IP CameraLive Video Page Icons Live VideoSelecting a Stream Primary Stream and Secondary Stream QuickView StreamUnicast Settings Taking a SnapshotDisplaying Video in the Multiscreen View System Tab Accessing the Camera MenusGeneral Settings Information SettingsCustomizing the Appearance of the Text Overlay Configuring the Time SettingsGenerating a System Log Rebooting the CameraRestoring All Camera Defaults Network TabGeneral Network Settings Changing the HostnameTurning On Dhcp General Imaging Settings Imaging TabTurning Off Dhcp White Balance Settings Exposure SettingsFocus Settings Tone Map SettingsConfiguring the Orientation of the Scene Digital Processing Changing the Digital Processing SettingsAuto Exposure Selecting Auto Exposure SettingsDay Night Settings, Manual Exposure Selecting Manual Exposure SettingsDay Night Auto and Manual Modes Day Night SettingsDay Night Auto Mode Day Night Manual ModeConfiguring Auto Focus Settings Manual Focus Configuring Manual Focus SettingsSetting Tone Map Options Auto White Balance Selecting Auto White Balance Settings10 Manual White Balance Selecting Manual White Balance SettingsTuring Off Window Blanking Turning On Window BlankingDeleting a Window Blanking Area Video PresetsVideo Configuration Streams Tab12 Select Video Preset Configuration Selecting a Video Preset Configuration13 Custom Video Stream Configuration Configuring a Custom Video Stream ConfigurationImage Rate Available Camera ResolutionQuality of Service for Differentiated Services Code Point Compression StandardsProfile Rate ControlGroups Users and Groups TabAdvance Sharpening UsersCreating a New User Includes default accounts for the following groupsDeleting a User Editing a UserCreating a New Group Editing a GroupDeleting a Group Setting the Camera to Node General Settings for Users and GroupsHandlers Setting the Camera to MixedEvents Tab SourcesSources Creating an Alarm Event SourceDeleting an Event Source Creating a Timer Event SourceCreating a System Event Source Editing an Event SourceCreating an Event Handler Send Email HandlersCreating an Event Handler Write Jpeg to SD Card Creating an Event Handler Open/Close Relay Creating an Event Handler Upload Jpeg to FTP ServerDeleting an Event Handler Editing an Event HandlerExample Handler Filter Setup Help MenuLog Off Menu General SpecificationsVideo MechanicalEnvironmental PhysicalSpecifications OL-22669-02

5011, 5010 specifications

Cisco Systems is a leader in networking technology, providing robust solutions for businesses worldwide. Among its many offerings, the Cisco 5010 and 5011 models stand out as powerful devices designed to address the needs of modern data centers and enterprises requiring reliable and high-performance networking solutions.

The Cisco 5010 is a fixed-configuration switch that combines advanced features suitable for small to medium-sized businesses. It supports a range of Ethernet and wireless technologies, allowing seamless integration into various network infrastructures. With a capacity for Layer 2 and Layer 3 switching, the 5010 facilitates efficient data routing and switching, ensuring optimal performance for diverse applications.

On the other hand, the Cisco 5011 builds upon the 5010's capabilities, offering enhanced features and scalability. It is designed for organizations that demand higher performance and advanced networking capabilities. This model supports more VLANs and can handle increased traffic loads, making it suitable for larger enterprises or data centers.

One of the key features of both models is Cisco's advanced security protocols. They provide comprehensive protection against unauthorized access and network threats, ensuring that sensitive information remains secure. The switches also support segmentation and access control lists (ACLs), allowing administrators to manage network traffic effectively.

Both the 5010 and 5011 models are equipped with Cisco's innovative IOS software, providing users with a familiar interface for configuration and management. This software allows for automation of routine tasks, reducing administrative overhead and minimizing potential errors.

In terms of performance, both switches are built to handle high-speed connectivity, supporting multiple gigabit interfaces. They also feature advanced Quality of Service (QoS) mechanisms, which prioritize critical network traffic and maintain high performance during peak usage times. The support for Power over Ethernet (PoE) allows businesses to power devices like IP phones and access points directly through the switch, simplifying infrastructure requirements.

Scalability is another important characteristic of the Cisco 5010 and 5011. They can accommodate growth in network size and complexity without compromising performance, making them future-proof investments for enterprises.

In conclusion, the Cisco 5010 and 5011 switches are exemplary products that illustrate Cisco's commitment to delivering high-quality networking solutions. With their advanced features, robust security, scalability, and high performance, they cater to the needs of modern businesses looking to enhance their connectivity and operational efficiency.
Top Page Image Contents