Cisco Systems 5010, 5011 manual Editing an Event Handler, Deleting an Event Handler

Page 69

Chapter 3 Operation

Events Tab

Step 4 Select Open/Close Relay in the Type drop-down menu.

Step 5 Move the On Time slider to set the amount of time that the relay will remain open. The time range is 0.1 to 200 seconds; the default setting is 0.1.

Step 6 Move the Off Time slider to set the amount of time that the relay will remain closed. The time range is 0.1 to 200 seconds; the default setting is 0.1.

Step 7 Click in the Pulse Count box and type a number.

Step 8 If you do not want the handler activated every time an event occurs, set filters for the handler.

a.Select the day(s) of the week on which you want the relay opened/closed.

b.Type times in the Start and End boxes for the days you have selected. Use time values in 24-hour notation (for example, use 0800 for 8:00 a.m., 1600 for 4:00 p.m.).

Step 9 Select one or more event sources to open/close the relay when those event sources are activated.

Step 10 Click the Submit button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

Refer to the following sections for more information:

•Example Handler Filter Setup, page 3-42

Editing an Event Handler

Step 1 Place your mouse pointer over the Events tab.

Step 2 Select Handlers from the drop-down menu.

Step 3 Click the handler profile that you want to delete from the defined handler box located on the left side of the page.

Step 4 Make any necessary changes to the available fields.

Step 5 Click the Submit button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

Deleting an Event Handler

Step 1 Place your mouse pointer over the Events tab.

Step 2 Select Handlers from the drop-down menu.

Step 3 Click the handler profile that you want to delete from the defined handler box located on the left side of the page.

Step 4 Click the Delete Handler button. A dialog box appears with the message “Are you sure you want to delete the handler?”

Step 5 Click OK. The handler profile is deleted from the defined handler box.

 

 

Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide

 

 

 

 

 

 

OL-22669-02

 

 

3-41

 

 

 

 

 

Page 68 Page 70
Image 69
Page 68 Page 70
Contents Americas Headquarters Page N T E N T S Unicast Profile OL-22669-02 Preface Viii Models Getting StartedA P T E R Product Overview Parts ListCamera Connections and Features Top View Product Label In-Ceiling Installation InstallationPin DC AID Auto Iris Lens Positioning the Camera Surface Installation Surface Back Box Installation Positioning the Camera Installing the Dome Liner Dome Liner and Lower Dome InstallationAligning the Lower Dome with Camera Qty Description Service CableCat5 or Cat6 Cable WiringSingle Camera Wiring VAC ConnectorMultiple Camera Wiring Alarm and Relay ConnectorConnecting a Relay Device Connecting AlarmsSupervised Alarms Supervised Alarm Conditions Unsupervised Alarms19 Unsupervised Alarm Conditions Alarm ConnectionsOL-22669-02 Minimum System Requirements Camera Configuration SequenceLogging on to the Camera Accessing the IP CameraLive Video Page Icons Live VideoSelecting a Stream Primary Stream and Secondary Stream QuickView StreamUnicast Settings Taking a SnapshotDisplaying Video in the Multiscreen View General Settings Accessing the Camera MenusInformation Settings System TabCustomizing the Appearance of the Text Overlay Configuring the Time SettingsRestoring All Camera Defaults Rebooting the CameraNetwork Tab Generating a System LogGeneral Network Settings Changing the HostnameTurning On Dhcp General Imaging Settings Imaging TabTurning Off Dhcp Focus Settings Exposure SettingsTone Map Settings White Balance SettingsConfiguring the Orientation of the Scene Digital Processing Changing the Digital Processing SettingsAuto Exposure Selecting Auto Exposure SettingsDay Night Settings, Manual Exposure Selecting Manual Exposure SettingsDay Night Auto Mode Day Night SettingsDay Night Manual Mode Day Night Auto and Manual ModesConfiguring Auto Focus Settings Manual Focus Configuring Manual Focus SettingsSetting Tone Map Options Auto White Balance Selecting Auto White Balance Settings10 Manual White Balance Selecting Manual White Balance SettingsTuring Off Window Blanking Turning On Window BlankingVideo Configuration Video PresetsStreams Tab Deleting a Window Blanking Area12 Select Video Preset Configuration Selecting a Video Preset Configuration13 Custom Video Stream Configuration Configuring a Custom Video Stream ConfigurationQuality of Service for Differentiated Services Code Point Available Camera ResolutionCompression Standards Image RateProfile Rate ControlAdvance Sharpening Users and Groups TabUsers GroupsCreating a New User Includes default accounts for the following groupsDeleting a User Editing a UserCreating a New Group Editing a GroupDeleting a Group Setting the Camera to Node General Settings for Users and GroupsEvents Tab Setting the Camera to MixedSources HandlersSources Creating an Alarm Event SourceCreating a System Event Source Creating a Timer Event SourceEditing an Event Source Deleting an Event SourceCreating an Event Handler Send Email HandlersCreating an Event Handler Write Jpeg to SD Card Creating an Event Handler Open/Close Relay Creating an Event Handler Upload Jpeg to FTP ServerDeleting an Event Handler Editing an Event HandlerExample Handler Filter Setup Help MenuLog Off Menu General SpecificationsEnvironmental MechanicalPhysical VideoSpecifications OL-22669-02

5011, 5010 specifications

Cisco Systems is a leader in networking technology, providing robust solutions for businesses worldwide. Among its many offerings, the Cisco 5010 and 5011 models stand out as powerful devices designed to address the needs of modern data centers and enterprises requiring reliable and high-performance networking solutions.

The Cisco 5010 is a fixed-configuration switch that combines advanced features suitable for small to medium-sized businesses. It supports a range of Ethernet and wireless technologies, allowing seamless integration into various network infrastructures. With a capacity for Layer 2 and Layer 3 switching, the 5010 facilitates efficient data routing and switching, ensuring optimal performance for diverse applications.

On the other hand, the Cisco 5011 builds upon the 5010's capabilities, offering enhanced features and scalability. It is designed for organizations that demand higher performance and advanced networking capabilities. This model supports more VLANs and can handle increased traffic loads, making it suitable for larger enterprises or data centers.

One of the key features of both models is Cisco's advanced security protocols. They provide comprehensive protection against unauthorized access and network threats, ensuring that sensitive information remains secure. The switches also support segmentation and access control lists (ACLs), allowing administrators to manage network traffic effectively.

Both the 5010 and 5011 models are equipped with Cisco's innovative IOS software, providing users with a familiar interface for configuration and management. This software allows for automation of routine tasks, reducing administrative overhead and minimizing potential errors.

In terms of performance, both switches are built to handle high-speed connectivity, supporting multiple gigabit interfaces. They also feature advanced Quality of Service (QoS) mechanisms, which prioritize critical network traffic and maintain high performance during peak usage times. The support for Power over Ethernet (PoE) allows businesses to power devices like IP phones and access points directly through the switch, simplifying infrastructure requirements.

Scalability is another important characteristic of the Cisco 5010 and 5011. They can accommodate growth in network size and complexity without compromising performance, making them future-proof investments for enterprises.

In conclusion, the Cisco 5010 and 5011 switches are exemplary products that illustrate Cisco's commitment to delivering high-quality networking solutions. With their advanced features, robust security, scalability, and high performance, they cater to the needs of modern businesses looking to enhance their connectivity and operational efficiency.
Top Page Image Contents