Cisco Systems 5010, 5011 manual Setting Tone Map Options

Page 49

Chapter 3 Operation

Imaging Tab

Setting Tone Map Options

Figure 3-8

Tone Map Page

Step 1 Place your mouse pointer over the Imaging tab.

Step 2 Select Tone Map from the drop-down menu.

Step 3 Select the Optimization setting:

•Normal (H.264): If the compression standard for the primary stream is H.264, set Optimization to Normal (H.264). This is the default setting.

•Photographic (JPEG): If the compression standard for the primary stream is JPEG, set Optimization to Photographic (JPEG).

Step 4 Move the Tone Map sliders to adjust the following image settings:

•Black Clip Percent: Adjusts the percent of pixels set to black. Move the slider to the right to darken the scene by increasing the number of pixels that are mapped to absolute black. The black clip percent range is 0 to 25; the default setting is 0.5.

•White Clip Percent: Adjusts the percent of pixels set to white. Move the slider to the right to lighten the scene by increasing the number of pixels that are mapped to absolute white. The white clip range is 0 to 25; the default setting is 0.5.

•Gamma Correction: Adjusts the details in the light and dark areas of the scene. Move the slider to the left to expose more detail in the light areas of the scene; move the slider to the right to expose more detail in the dark areas of the scene. The gamma corrector range is 0.1 to 3.0; the default setting is 2.2.

Step 5 If required, click the Factory Defaults button to reset the Tone Map to the factory default setting.

 

 

Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide

 

 

 

 

 

 

OL-22669-02

 

 

3-21

 

 

 

 

 

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Americas Headquarters Page N T E N T S Unicast Profile OL-22669-02 Preface Viii Getting Started ModelsA P T E R Product Overview Parts ListCamera Connections and Features Top View Product Label In-Ceiling Installation InstallationPin DC AID Auto Iris Lens Positioning the Camera Surface Installation Surface Back Box Installation Positioning the Camera Installing the Dome Liner Dome Liner and Lower Dome InstallationAligning the Lower Dome with Camera Qty Description Service CableCat5 or Cat6 Cable WiringSingle Camera Wiring VAC ConnectorMultiple Camera Wiring Alarm and Relay ConnectorConnecting Alarms Connecting a Relay DeviceSupervised Alarms Supervised Alarm Conditions Unsupervised Alarms19 Unsupervised Alarm Conditions Alarm ConnectionsOL-22669-02 Minimum System Requirements Camera Configuration SequenceLogging on to the Camera Accessing the IP CameraLive Video Page Icons Live VideoSelecting a Stream QuickView Stream Primary Stream and Secondary StreamUnicast Taking a Snapshot SettingsDisplaying Video in the Multiscreen View General Settings Accessing the Camera MenusInformation Settings System TabCustomizing the Appearance of the Text Overlay Configuring the Time SettingsRestoring All Camera Defaults Rebooting the CameraNetwork Tab Generating a System LogChanging the Hostname General Network SettingsTurning On Dhcp Imaging Tab General Imaging SettingsTurning Off Dhcp Focus Settings Exposure SettingsTone Map Settings White Balance SettingsConfiguring the Orientation of the Scene Digital Processing Changing the Digital Processing SettingsAuto Exposure Selecting Auto Exposure SettingsDay Night Settings, Manual Exposure Selecting Manual Exposure SettingsDay Night Auto Mode Day Night SettingsDay Night Manual Mode Day Night Auto and Manual ModesConfiguring Auto Focus Settings Manual Focus Configuring Manual Focus SettingsSetting Tone Map Options Auto White Balance Selecting Auto White Balance Settings10 Manual White Balance Selecting Manual White Balance SettingsTuring Off Window Blanking Turning On Window BlankingVideo Configuration Video PresetsStreams Tab Deleting a Window Blanking Area12 Select Video Preset Configuration Selecting a Video Preset Configuration13 Custom Video Stream Configuration Configuring a Custom Video Stream ConfigurationQuality of Service for Differentiated Services Code Point Available Camera ResolutionCompression Standards Image RateProfile Rate ControlAdvance Sharpening Users and Groups TabUsers GroupsCreating a New User Includes default accounts for the following groupsDeleting a User Editing a UserEditing a Group Creating a New GroupDeleting a Group Setting the Camera to Node General Settings for Users and GroupsEvents Tab Setting the Camera to MixedSources HandlersSources Creating an Alarm Event SourceCreating a System Event Source Creating a Timer Event SourceEditing an Event Source Deleting an Event SourceCreating an Event Handler Send Email HandlersCreating an Event Handler Write Jpeg to SD Card Creating an Event Handler Open/Close Relay Creating an Event Handler Upload Jpeg to FTP ServerDeleting an Event Handler Editing an Event HandlerHelp Menu Example Handler Filter SetupLog Off Menu General SpecificationsEnvironmental MechanicalPhysical VideoSpecifications OL-22669-02

5011, 5010 specifications

Cisco Systems is a leader in networking technology, providing robust solutions for businesses worldwide. Among its many offerings, the Cisco 5010 and 5011 models stand out as powerful devices designed to address the needs of modern data centers and enterprises requiring reliable and high-performance networking solutions.

The Cisco 5010 is a fixed-configuration switch that combines advanced features suitable for small to medium-sized businesses. It supports a range of Ethernet and wireless technologies, allowing seamless integration into various network infrastructures. With a capacity for Layer 2 and Layer 3 switching, the 5010 facilitates efficient data routing and switching, ensuring optimal performance for diverse applications.

On the other hand, the Cisco 5011 builds upon the 5010's capabilities, offering enhanced features and scalability. It is designed for organizations that demand higher performance and advanced networking capabilities. This model supports more VLANs and can handle increased traffic loads, making it suitable for larger enterprises or data centers.

One of the key features of both models is Cisco's advanced security protocols. They provide comprehensive protection against unauthorized access and network threats, ensuring that sensitive information remains secure. The switches also support segmentation and access control lists (ACLs), allowing administrators to manage network traffic effectively.

Both the 5010 and 5011 models are equipped with Cisco's innovative IOS software, providing users with a familiar interface for configuration and management. This software allows for automation of routine tasks, reducing administrative overhead and minimizing potential errors.

In terms of performance, both switches are built to handle high-speed connectivity, supporting multiple gigabit interfaces. They also feature advanced Quality of Service (QoS) mechanisms, which prioritize critical network traffic and maintain high performance during peak usage times. The support for Power over Ethernet (PoE) allows businesses to power devices like IP phones and access points directly through the switch, simplifying infrastructure requirements.

Scalability is another important characteristic of the Cisco 5010 and 5011. They can accommodate growth in network size and complexity without compromising performance, making them future-proof investments for enterprises.

In conclusion, the Cisco 5010 and 5011 switches are exemplary products that illustrate Cisco's commitment to delivering high-quality networking solutions. With their advanced features, robust security, scalability, and high performance, they cater to the needs of modern businesses looking to enhance their connectivity and operational efficiency.
Top Page Image Contents