Samsung SCC-C6455N user manual Day/Night, You can specify a recording mode according to the scene

setup

DAY/NIGHT

You can specify a recording mode according to the scene.

For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20)

1.Select <CAMERA SET> - <DAY/NIGHT>.

2.Select a screen transition mode according to the illumination, and set options as appropriate.

DAY : Fixed to DAY mode, regardless of the scene.

NIGHT : Fixed to NIGHT mode, regardless of the scene.

If BURST is set to <ON>, the burst signal will be output along with the black-and-white composite video signal.

AUTO : According to the luminance, this will switch DAY to NIGHT mode, or vice versa.

-BURST : If set to <OFF>, the burst signal will not be output in NIGHT mode.

-DAYNIGHT BRIGHTNESS : Specify the brightness level switching from COLOR to BW filter.

Adjusting from HIGH to LOW will cause to switch the filter in a darker screen.

-DAYNIGHT DWELL TIME : Time required to determine the filter switch.

DAY/NIGHT	AUTO
WHITE BAL
FOCUS MODE	ONEAF
ZOOM SPEED	[2]
DISPLAY ZOOM	OFF
DISPLAY P/T	OFF
DIGITAL ZOOM	OFF
DETAIL	[2]
V-SYNC	INT
	AUTO
BURST	OFF
DAYNIGHT
BRIGHTNESS	MID
DWELL TIME	2SEC
NIGHTDAY
BRIGHTNESS	MID
DWELL TIME	5SEC
MASK AREA	1 2

-NIGHTDAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the filter in a darker screen.

-NIGHTDAY DWELL TIME : Time required to determine the filter switch.

-MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed.

This will prevent an error in switching filter, or failure to determine the filter switch in a night scene where a bright spot light source exists.

Any excessively bright area in a night scene will be MASKed.

MASK AREA

<SIZE> <LOCATION>

28_ setup

00885A-NA_SCC-C6455N-ENG.indb 28 2009-08-05 오후 2:43: