GXV3601 IP Camera
Connect to the Camera using Static IP.
If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168.
1.Connect your PC to the same network as the GXV3601.
2.Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure the subnet mask to 255.255.255.0.
3.Make sure that the device is turned on and connected to the network.
4.Start Internet Explorer on your computer.
5.Enter 192.168.1.168 in the address bar of the browser.
6.Enter the administrator user name and password to access the Web Configuration Interface
7.The default user name and password are both set to admin.
8.IE will indicate that “This website wants to install the following
9.You will see the home page.
Firmware 1.0.4.6 | Page 14 of 36 |
Grandstream Networks, Inc. | 09/2010 |