GXV3601 IP Camera
files: SD card, USB Flash drive, or USB hard drive.
Voice Alarm to SIP Phone – If this option is selected, the GXV3601 will make calls to the number listed in the Phone List page using the configured SIP account when an alarm is triggered. To use this function, the settings in SIP page must be configured properly.
Alarm Output – If this option is selected, the alarm will output via the configured method/equipment when it is triggered.
Upload to Alarm Center – This option is an integrated feature with GSurf. If this option is checked, the GXV3601 will report the alarm event to GSurf.
Record Video and Upload to FTP server – If this option is selected, the GXV3601will record the video and upload it to the FTP server when an alarm is triggered. You must check Record Video and configure the FTP page properly to use this feature.
Email JPEG and Store it to USB drive or SD card – If this option is selected, the GXV3601 will capture the image and store it to connected live storage device when an alarm is triggered.
Set up Alarm Event Time Schedule
This section allows you to configure the time during which the GXV3601 will monitor the Alarm Input. The GXV3601 not only can monitor your settings but also can take actions when the alarm is triggered.
Dropdown list for date | Available | time |
| schedules |
|
To add a schedule, select the date from the dropdown list, Start Time and End time and Click Add to add a new time schedule.
To delete a schedule, check the schedule you would like to remove and click Delete.
How to connect an Alarm Output Equipment to GXV3601
Here is a sample connection diagram. Connect the alarm output equipment to the GXV3601 by following the diagram below.
Firmware 1.0.4.6 | Page 29 of 36 |
Grandstream Networks, Inc. | 09/2010 |