GXV3601 IP Camera
Safety Instructions
These instructions are intended to assist users with the operation of the GXV3601 and also to instruct on how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected.
Warnings Follow these safeguards to prevent serious injury or death.
Warnings:
Cautions Follow these precautions to prevent potential injury or material damage.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with DC 12V according to the
Do not use a
When the device is installed on the wall or ceiling, make sure that it is firmly attached.
Notice：
Make sure that the power supply voltage is correct before using the camera. Do not drop the device or expose it to physical shock.
Do not expose the device to temperatures outside the range of
Do not expose the device to damp/wet conditions or high electromagnetism radiation. To avoid heat accumulation, make sure that your operating environment has proper ventilation.
Do not attempt to open, disassemble, or modify the device
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average life time. The average life time varies from the differences between operating environments and usage history. Regular maintenance checks are recommended for all users. Please contact your dealer for more details.
Firmware 1.0.4.6 | Page 2 of 36 |
Grandstream Networks, Inc. | 09/2010 |