Tandberg Data 1080P manual Camera cables, Hdmi cable, Making your own cables, HD-SDI cable

TANDBERG PrecisionHD 1080p/720p camera Camera User Guide

Contentsontents

IntroductionIntroduction

PhysicalPhysicaliinterfacet rf

Cablesless

ConnectiConnect toto codec

Videoideo forformatsats

Daisyaisy chainingchaining

Appendicesppendices

Contactontact usus

Camera cables

HDMI cable

The HDMI cable delivered with the camera is 5 meters.

Making your own cables

If you must assemble your own cables, the tables show the pin-out required.

Maximum length is 15 meter with a category 2 certified good quality HDMI cable.

HD–SDI cable

The HD-SDI cable must be purchased separately. The maximum recommended length of HD–SDI cable is 100  meters.

HDMI to DVI–D adapter

The HDMI to DVI–D adapter is used when connecting to a TANDBERG MXP Codec or TANDBERG Video Switch.

	Pin-out—VISCA Camera control
	RJ 45 8 pins shielded modular jack
Pin		Signal name

8+12V (2.8mA current source when connected in daisy chain)

7	GND
6	TXD (out)
5	NC (no connect)
4	NC (no connect)
3	RXD (in)

2GND

1+12V

Pin-out—TANDBERG camera cable

RJ45 (8 pin) to D-SUB

Signal	RJ45		D-SUB
name	pin		pin
+12Vdc	1	Twisted	4
GND	2	pair	5
RX	3	Twisted	2
TX	6	pair	3
NC	4	Twisted	1
NC	5	pair	6
GND	7	Twisted	5
+12Vdc	8	pair	4

	Pin-out—VISCA Daisy chain
		RJ 11 6 pins modular jack
Pin		Signal name
6		GND
5		GND
4		RXD (in)
3		TXD (out)

2Presence (12V in daisy chain)

1GND

D14640.01—MARCH 2010 10 www.tandberg.com