TANDBERG PrecisionHD 1080p/720p camera | Camera User Guide |
Contentsontents
IntroductionIntroduction
PhysicalPhysicaliinterfacet rf
Cablesables
ConnectiConnect toto codec
Videoideo forformatsats
DaisyDaisyai chaininghainiiningg
Appendicesppendices
Contactontact usus
Daisy chaining of the PrecisionHD 720p
A single daisy chain can have:
•Three cameras when using Codec C60
•Seven cameras when using Codec C90.
Locate the Extra Camera and Power connectors.
Example. TANDBERG PrecisionHD 720p cameras in daisy chain.
Power in |
| Power in |
12V DC |
| 12V DC |
Main | Second | Third |
camera | camera | camera |
•Power. The first camera in the chain is powered up from the codec by the VISCA camera control cable. Additional cameras must use the 12V DC Power in.
•Extra camera cable. The daisy chained cameras are connected by using the VISCA Extra Camera cable (maximum length 20 m / 65.6 ft) between the Extra Camera and Codec Control sockets
| |||
|
| ||
|
| ||
HDMI out: | Connect to the | HDMI out: | |
Connect to the | Camera Control | Connect to the | |
Video Input 1 | socket on the | ||
Video Input 2 | |||
on the codec | codec. | ||
on the codec | |||
|
|
You can connect up to three cameras with Codec C60 and up to seven cameras with Codec C90
HDMI out:
Connect to the Video Input 3 on the codec
VISCA™ is a trademark of Sony Corporation
18 | www.tandberg.com |