Tandberg Data 1080P manual Daisy chaining of the PrecisionHD 1080p 12X/4X

Page 17

TANDBERG PrecisionHD 1080p/720p camera

Camera User Guide

Contentsontents

IntroductionIntroduction

PhysicalPhysicaliinterfacet rf

Cablesables

ConnectiConnect toto codec

Videoideo forformatsats

DaisyDaisyai chaininghainiiningg

Appendicesppendices

Contactontact usus

Daisy chaining of the PrecisionHD 1080p 12X/4X

A single daisy chain with PrecisionHD 1080p

12X can have:

Three cameras when using Codec C60.

Seven cameras when using Codec C90.

The PrecisionHD 1080p 4X has daisy chain support, but can only be in the end of a chain.

Locate the Extra Camera and Power connectors.

Power. The first camera in the chain is

powered up from the codec by the VISCA

camera control cable. Additional cameras

must use the 12V DC Power in.

Example. TANDBERG PrecisionHD 1080p 12X/4X cameras in daisy chain.

 

Power in

 

12V DC

Main

Second

camera

camera

RJ11–RJ45

RJ11–RJ45

Power in 12V DC

Third

camera

RJ11–RJ45

You can connect up to three cameras with Codec C60 and up to seven cameras with Codec C90

Extra camera cable. The daisy chained

cameras are connected by using the VISCA

Extra Camera cable (maximum length 20 m

/ 65.6 ft) between the Extra Camera In and

Codec Control In sockets.

HDMI and HD-SDI. The HDMI and HD-SDI

outputs can be used simultaneously on the

same camera.

Connect to the

HDMI out:

Camera Control

Connect to the

socket on the

Video Input 1

codec.

on the codec

HDMI out:

HDMI out:

Connect to the

Connect to the

Video Input 2

Video Input 3

on the codec

on the codec

VISCA™ is a trademark of Sony Corporation

D14640.01—MARCH 2010

17

www.tandberg.com

Image 17
Contents PrecisionHD Camera User Guide This guide? Table of ContentsTandberg PrecisionHD 1080p/720p camera 12X/4X IntroductionChapter Purpose of this document IntroductionDisclaimers and Notices Products covered in this guidePhysical interface PrecisionHD 1080p 12X/4X camera Hdmi PrecisionHD 720p cameraCablesless About cablesHdmi cable Camera cablesMaking your own cables HD-SDI cableConnecting the camera to the codec How to connect the camera Using the camera with Profile having Codec C20Using the camera with Profile having Codec C60 Using the camera with Profile having Codec C90 Codec C90 configurationsUsing the camera with Codec C90 Video output formats Line voltage frequency Tandberg PrecisionHD 1080p 12X/4XDaisy chaining of the cameras Daisy chaining of the PrecisionHD 1080p 12X/4X Locate the Extra Camera and Power connectorsDaisy chaining of the PrecisionHD 720p Appendices RS-232 Commands and inquiries Controlling cameras using the Visca protocolTandberg PrecisionHD 1080p 12X/4X camera RS-232 ParametersVisca message format Push messages Network and interface commandsVISCA/RS-232 control protocol, Command Command Packet Comments Camera commandsPtzf movement commands Inquiries Command Response PacketOther commands Software upload commandsDebug commands for Tandberg cameras DIP Switch Video mode selectionTandberg PrecisionHD 1080p 12X/4X cameras Technical specificationsTandberg PrecisionHD 720p camera Tandberg PrecisionHD 1080pHeadquarters European Headquarters Tandberg