Nikon PD-10 LED Lamp Display, Lamp Display Status Printing standby, Lights Power is on

LED Lamp Display

The POWER, LINK and BUSY lamps (c3) indicate the following after the printer and camera are set up.				En
During printing standby, each lamp displays the color corresponding to the check mark (9).
Lamp	Display	Status	Printing standby
POWER	Lights	Power is on	9
LINK	Lights in yellow green	Ready for wireless connection	9
	Lights in orange	Not ready for wireless connection
	Blinks rapidly in orange for about 3 seconds	There is a problem with the wireless connection.
BUSY	Lights in yellow green	Printing standby	9
	Blinks in yellow green	Transferring data for printing
	Blinks rapidly in yellow green for about 3 sec-	There is a problem transferring data for printing.
	onds
	Blinks in orange	Setting Profile Information on the camera
	Lights in orange for about 3 seconds	Profile Information setup on the camera complete
	Blinks rapidly in orange for about 3 seconds	There is a problem setting Profile Information on the camera.
	Blinks alternately in orange and yellow green	Resetting (c10)

Note

•If the connection with the camera is not established (when the BUSY lamp is not lit) and no operations are performed for about three minutes, the PD-10 automatically turns off in order to reduce power consumption.

•If in printing standby (indicated by the check marks in the chart above) for 10 minutes, the PD-10 automatically turns off.

9