Nikon PD-10 As soon as the message is dis, Sage Ready to connect to, Now? will be displayed on

			STA
			RT
P			SY
OW	ER
		LINK	BU

1 2

Ready to connect to

Printer1

Do you want to connect now?

No

Yes

Confirm

Number of Devices That Can Be Set

•	The PD-10 can store the Profile Information
	of up to 50 cameras. If 50 profiles have al-
	ready been created, the oldest profile will
	be deleted when storing a new profile.
•	The camera can store the Profile Informa-
	tion of up to 9 devices, such as the PD-10,
	computers, and printers connected to com-
	puters. If 9 profiles have already been cre-
	ated and the Profile Information of the

En

4 As soon as the message is dis-	5 After setup is complete, the mes-
played, press the START button on	sage “Ready to connect to
the PD-10 for two seconds.	Printer1 Do you want to connect
• Press the START button while the mes-	now?” will be displayed on the
sage is displayed.	camera monitor.
• The BUSY lamp on the PD-10 will blink	• Select No to return to the CHOOSE PRO-
slowly in orange 1. After a while, the	FILE screen (c6). Select Yes to continue
BUSY lamp will light in orange for about	operations and print (step 3 on c8).
three seconds when setup is complete	• After Profile Information is set up, the
2.	camera and PD-10 can be connected any
	number of times by choosing the Profile In-
	formation from the camera CHOOSE PRO-
	FILE screen. Profile Information must be set
	up again when Reset (c10) is performed.

Note

If setup fails, the BUSY lamp on the PD-10 will blink rapidly in orange, and a message will be dis- played on the camera monitor. If this occurs, press the dbutton on the camera, and perform set- tings again.

PD-10 is stored, delete an unneeded profile

first using the Wireless Camera Setup Utili-

ty provided with the camera. If an unneed-

ed profile is not deleted, the oldest profile

will be overwritten. See the camera manual

for more information on deleting profiles.

Profile names

•When the Profile Information of the PD-10 is stored in the camera, the pro- file name is automatically set to “Printer x” (where x is a digit from 1 to 9).

•The profile name “Printer x” can be changed later using the Wireless Camera Setup Utility provided with the camera. See the camera manual for more information.

Turning the PD-10 Off

•The PD-10 will turn off when discon- nected from the printer.

7