Airlink101 AICN500W user manual Setting up Video & Audio, Network IP Filter, Video & Audio Camera

Page 36

-HTTP Port: The default HTTP port is 80. Some ISP’s have port 80 blocked. If you are having problems, you can change it to some other port. The suggested port to be used is anything between 1024 to 65535

Network >> IP Filter

The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera.

Start/End IP Address

Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP address and End IP address. When you are finished, click Add to save the range setting. You can repeat the action to assign multiple ranges for the camera.

For example, when you enter 192.168.0.50 in Start IP Address and 192.168.0.80 in End IP Address, the users whose IP address located within 192.168.0.50 ~ 192.168.0.80 will not be allowed to access the camera.

Deny IP List

The list displays the range setting(s) of IP addresses that are not allowed to access the camera. To clear the setting, select a range of IP addresses from the list and click Delete.

4.4 Setting up Video & Audio

The Video & Audio menu contains three sub-menus that provide the video and audio settings for the camera.

Video & Audio >> Camera

- 35 -

Image 36

Contents SkyIPCam500W Wireless Night Vision Network Camera Table of Content Technical SupportChecking the Package Contents Getting to Know Your CameraFeatures and Benefits „ Accessing the Camera using Web Browser „ Accessing the Camera using SkyIPCam ViewSystem Requirements „ NetworkingInstalling the Camera Stand Connecting the Camera to LAN/WLANCamera Stand Applications of the Camera Home ApplicationsInstalling SkyIPCam Utility Click on Install SkyIPCam UtilityUsing SkyIPCam Utility Page Page Page Page Method 1 --- Access from Web Browser Viewing ImagesPage Method 2 --- Access from SkyIPCam Utility Follow to mentioned in Method Using SkyIPCam View To Install the ProgramTo Launch the Program Item Features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel„ PAN-TILT Control Panel optional To Add a Camera „ Video View Window and Camera ListClick Add New Camera Page To Remove a Camera To Link to the Web Page of the CameraTo Record Video Manually recordingSchedule recording To Configure the Recording Settings To Playback the Recorded Video To Set up Motion Detection Options Account Other Information Using the Web Configuration Basic SetupBasic System „ Basic„ Administrator Basic Date & TimeBasic User „ Date & TimeNetwork Settings „ Guest„ IP Setting Ddns SettingNetwork Network „ UPnPSetting up Video & Audio Network IP FilterVideo & Audio Camera „ Start/End IP Address„ Image Setting „ Overlay SettingVideo & Audio Video Video & Audio Audio„ Camera Microphone Event Server Configuration Event Server Setting FTPEvent Server Setting Email Motion Detect „ EmailEvent Configuration Event Configuration General SettingEvent Configuration Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Schedule Trigger„ Factory Reset „ System Reboot„ Configuration „ Update FirmwareInformation „ Device Info„ System Log Specification Glossary of Terms NumbersHEX Java Smtp WAN Technical Support