Airlink101 AICN500W Tools, Factory Reset, System Reboot, Configuration, Update Firmware

Page 43

You can separately configure the schedule for trigger function of the camera by Email, or FTP. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and set the Interval time.

4.8 Tools

The Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configuration, and upgrade the firmware for the camera.

Factory Reset

Click Reset to restore all factory default settings for the camera.

System Reboot

Click Reboot to restart the camera just like turning the device off and on. The camera configuration will be retained after rebooting.

Configuration

You can save your camera configuration as a backup file on your computer. Whenever you want to resume the original settings, you can restore them by retrieving the backup file.

-Backup: Click Get the backup file to save the current configuration of the camera.

-Restore: Click Browse to locate the backup file and then click Restore.

Update Firmware

This item displays the current firmware version. You can upgrade the firmware for your camera once you obtained a latest version of firmware.

-Select the firmware: Click Browse to locate the backup file and then click Update.

NOTE Make sure to keep the camera connected to the power source during the process of upgrading firmware. Otherwise, the camera might be damaged because of failure of upgrading firmware.

- 42 -

Image 43

Contents SkyIPCam500W Wireless Night Vision Network Camera Technical Support Table of ContentGetting to Know Your Camera Checking the Package ContentsFeatures and Benefits „ Networking „ Accessing the Camera using Web Browser„ Accessing the Camera using SkyIPCam View System RequirementsConnecting the Camera to LAN/WLAN Installing the Camera StandCamera Stand Home Applications Applications of the CameraClick on Install SkyIPCam Utility Installing SkyIPCam UtilityUsing SkyIPCam Utility Page Page Page Page Viewing Images Method 1 --- Access from Web BrowserPage Method 2 --- Access from SkyIPCam Utility Follow to mentioned in Method To Install the Program Using SkyIPCam ViewTo Launch the Program „ Controls Panel Item Features„ View Selection Panel „ System Panel „ Camera Panel„ PAN-TILT Control Panel optional „ Video View Window and Camera List To Add a CameraClick Add New Camera Page Manually recording To Remove a CameraTo Link to the Web Page of the Camera To Record VideoSchedule recording To Configure the Recording Settings To Playback the Recorded Video To Set up Motion Detection Options Account Other Information „ Basic Using the Web ConfigurationBasic Setup Basic System„ Date & Time „ AdministratorBasic Date & Time Basic User„ Guest Network Settings„ UPnP „ IP SettingDdns Setting Network Network„ Start/End IP Address Setting up Video & AudioNetwork IP Filter Video & Audio Camera„ Overlay Setting „ Image SettingVideo & Audio Audio Video & Audio Video„ Camera Microphone Event Server Setting FTP Event Server ConfigurationEvent Server Setting Email „ Email Motion DetectEvent Configuration General Setting Event ConfigurationEvent Configuration Schedule Profile Event Configuration Schedule Trigger Event Configuration Motion Detect Trigger„ Update Firmware „ Factory Reset„ System Reboot „ Configuration„ Device Info Information„ System Log Specification Numbers Glossary of TermsHEX Java Smtp WAN Technical Support