Airlink101 AICN500W user manual Features and Benefits

Page 4

External Antenna

Screw Hole is used to connect the camera stand.

DC Power Connector is used to connect the power adapter, in order to supply power to the camera.

Reset Button will restart the camera when it is pressed quickly; when it is long pressed for ten seconds, the camera will be reset to the factory’s default settings.

Ethernet Cable Connector

is used to connect the network cable, which supports the NWay protocol so that the camera can detect the network speed automatically.

Rear View

1.3 Features and Benefits

„Audio Capability

The built-in microphone allows you to capture and monitor sounds and voices.

„Day & Night Surveillance Supported

The six Infrared LEDs around the standard lens assembly enable the camera to capture crystal clear images in dark environments or at night. When the Light Sensor detects low light levels, the camera captures the images in black & white mode using the infrared LEDs.

„Remote Control Supported

By using a standard Web browser or the bundled SkyIPCam View software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded over the network when a new firmware is available. The users are also allowed to monitor the images and take snapshots via the network.

„Multiple Platforms Supported

The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols. Therefore, you can use the camera in a mixed operating system environment, such as Windows 2000 and Windows XP.

„Multiple Applications Supported

With remote access technology, you can use the cameras to monitor various objects and places for your own purposes.

For example, babies at home, patients in the hospital, offices and banks, and so on. The camera can

- 3 -

Image 4
Contents SkyIPCam500W Wireless Night Vision Network Camera Table of Content Technical SupportChecking the Package Contents Getting to Know Your CameraFeatures and Benefits „ Accessing the Camera using Web Browser „ Accessing the Camera using SkyIPCam ViewSystem Requirements „ NetworkingConnecting the Camera to LAN/WLAN Installing the Camera StandCamera Stand Applications of the Camera Home ApplicationsInstalling SkyIPCam Utility Click on Install SkyIPCam UtilityUsing SkyIPCam Utility Page Page Page Page Method 1 --- Access from Web Browser Viewing ImagesPage Method 2 --- Access from SkyIPCam Utility Follow to mentioned in Method Using SkyIPCam View To Install the ProgramTo Launch the Program „ Controls Panel Item Features„ View Selection Panel „ System Panel „ Camera Panel„ PAN-TILT Control Panel optional „ Video View Window and Camera List To Add a CameraClick Add New Camera Page To Remove a Camera To Link to the Web Page of the CameraTo Record Video Manually recordingSchedule recording To Configure the Recording Settings To Playback the Recorded Video To Set up Motion Detection Options Account Other Information Using the Web Configuration Basic SetupBasic System „ Basic„ Administrator Basic Date & TimeBasic User „ Date & TimeNetwork Settings „ Guest„ IP Setting Ddns SettingNetwork Network „ UPnPSetting up Video & Audio Network IP FilterVideo & Audio Camera „ Start/End IP Address„ Image Setting „ Overlay SettingVideo & Audio Audio Video & Audio Video„ Camera Microphone Event Server Setting FTP Event Server ConfigurationEvent Server Setting Email Motion Detect „ EmailEvent Configuration General Setting Event ConfigurationEvent Configuration Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Schedule Trigger„ Factory Reset „ System Reboot„ Configuration „ Update Firmware„ Device Info Information„ System Log Specification Glossary of Terms NumbersHEX Java Smtp WAN Technical Support