Airlink101 AICN1747W user manual Wep

Page 73

 

common carrier telecommunication techniques.

WEP

WEP is widely used as the basic security protocol in Wi-Fi networks, which secures

 

data transmissions using 64-bit or 128-bit encryption.

Windows

Windows is a graphical user interface for workstations that use DOS.

WPA

WPA (Wi-Fi Protected Access) is used to improve the security of Wi-Fi networks,

 

replacing the current WEP standard. It uses its own encryption, Temporal Key Integrity

 

Protocol (TKIP), to secure data during transmission.

WPA2

Wi-Fi Protected Access 2, the latest security specification that provides greater data

 

protection and network access control for Wi-Fi networks. WPA2 uses the government-

 

grade AES encryption algorithm and IEEE 802.1X-based authentication, which are

 

required to secure large corporate networks.

- 72 -

Image 73
Contents User’s Manual CH Apter Softw are Inst ALL Ation CH Apter Introduction to Your Camera Checking the Package ContentsGetting to Know Your Camera Front ViewPage Features and Benefits System Requirement Accessing the Camera using Web BrowserNetworking RAM 512MBInstalling the Wall Mount Kit Chapter Hardware InstallationConnecting the Camera to LAN/WLAN Applications of the Camera Click on Install Utility and Software Installing SkyIPCam UltraViewPage Configuring the Camera Page Page Page Viewing Images Method a Access Camera from SkyIPCam UtilityPage Page Basic Setup Using the Web ConfigurationBasic System BasicDate & Time Basic Date & TimeBasic User AdministratorGeneral User GuestIP Setting Network SettingsNetwork Network UPnP Ddns SettingPorts Number Start/End IP Address Network IP FilterDeny IP List WPA2-PSK Network Wireless SettingPage Select PIN Mode Network Wireless WPS SettingSelect PBC Mode Recommended Pan & Tilt Pan & Tilt Settings Pan/Tilt SettingsImage Setting Setting up Video & AudioOverlay Setting Video & Audio CameraMjpeg Video & Audio VideoCamera Microphone Video & Audio AudioCamera Speaker Out Event Server Setting FTP Event Server ConfigurationEvent Server Setting Email Motion Detect Event Configuration General Setting Event ConfigurationEvent Configuration Arrange Schedule Profile Event Configuration Motion Detection Trigger Event Configuration Gpio Trigger Event Configuration Schedule TriggerSystem Reboot Factory ResetConfiguration Update FirmwareDevice Info InformationSystem Log Starting the Program Chapter Using Skyipcam UltraviewMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Adding a Camera Accessing the CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Enabling / Disabling Recording Recording / Playing VideoConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap User Management Configuring the SystemConfiguring Event Trigger Setting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Humidity Interface Schematic Connector Pin AssignmentGpio Terminal Application Numbers Glossary of TermsHEX Java Smtp WEP Technical Support