Airlink101 AICN1747W user manual

Page 47

4.When search is finished, select the camera and click Add.

5.The information of the camera will be displayed on the window. When completed, click Preview and then click Save to return to the Device Setting window. The added camera will be displayed in the Device List.

Option	Description

Model	Display the model name of the camera.

Camera	You have to assign a descriptive name for the
Title	camera.

IP	Display the IP address of the camera.
Address

Port	Display the port path of the camera.

Account	Display the user name for accessing the camera.
Password	The password for accessing the camera will not be
	displayed.

Stream	Select the stream type as MPEG4, MJPEG, or H.264.
	(H.264 is not supported by this model)

Record	Select Yes or No to set up recording function of the
	camera.

Preview	This window allows you to preview the image of the

- 46 -

Image 47

Contents User’s Manual CH Apter Softw are Inst ALL Ation CH Apter Introduction to Your Camera Checking the Package ContentsGetting to Know Your Camera Front ViewPage Features and Benefits RAM 512MB Accessing the Camera using Web BrowserSystem Requirement NetworkingInstalling the Wall Mount Kit Chapter Hardware InstallationConnecting the Camera to LAN/WLAN Applications of the Camera Click on Install Utility and Software Installing SkyIPCam UltraViewPage Configuring the Camera Page Page Page Viewing Images Method a Access Camera from SkyIPCam UtilityPage Page Basic Using the Web ConfigurationBasic Setup Basic SystemDate & Time Basic Date & TimeGuest AdministratorBasic User General UserNetwork Network Network SettingsIP Setting Ports Number Ddns SettingUPnP Deny IP List Network IP FilterStart/End IP Address WPA2-PSK Network Wireless SettingPage Select PBC Mode Recommended Network Wireless WPS SettingSelect PIN Mode Pan & Tilt Pan & Tilt Settings Pan/Tilt SettingsVideo & Audio Camera Setting up Video & AudioImage Setting Overlay SettingMjpeg Video & Audio VideoCamera Speaker Out Video & Audio AudioCamera Microphone Event Server Setting FTP Event Server ConfigurationEvent Server Setting Email Motion Detect Event Configuration General Setting Event ConfigurationEvent Configuration Arrange Schedule Profile Event Configuration Motion Detection Trigger Event Configuration Gpio Trigger Event Configuration Schedule TriggerUpdate Firmware Factory ResetSystem Reboot ConfigurationSystem Log InformationDevice Info Starting the Program Chapter Using Skyipcam UltraviewMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Adding a Camera Accessing the CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Enabling / Disabling Recording Recording / Playing VideoConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap User Management Configuring the SystemConfiguring Event Trigger Setting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Humidity Gpio Terminal Application Connector Pin AssignmentInterface Schematic Numbers Glossary of TermsHEX Java Smtp WEP Technical Support