Airlink101 AICN1747W Event Configuration Schedule Trigger, Event Configuration Gpio Trigger

Event Configuration >> Schedule Trigger

You can separately configure the schedule for trigger function of the camera by Email, or FTP. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and set the Interval time.

Event Configuration >> GPIO Trigger

Select the Enable option to enable the GPIO trigger function of the camera, so that you can set Trigger Out function or send captured images within the detecting area to the FTP server or email receiver. You have to configure corresponding settings, such as FTP server and email server, to enable this feature.

-Schedule Profile: Select a schedule profile from the pull-down list.

-Action: Set the Trigger Out function or select the destination of the captured images: Send Email, or FTP Upload.

- 38 -