Airlink101 AICN1747W user manual Event Server Configuration, Event Server Setting FTP

Page 33

4.6 Event Server Configuration

The Event Server menu contains two sub-menus that allow you to upload images to FTP, and send emails that include still images.

When you complete the required settings for FTP, or Email, click Test to find out if the related configuration is correct or not. Once the camera connects to the server successfully, click Apply.

Event Server Setting>> FTP

FTP

-Host Address: Enter the IP address or domain name of the target FTP server. If you enter the domain name, you MUST configure DNS settings in Network / IP Setting first.

-Port Number: Enter the port number used for the FTP server.

-User Name: Enter the user name to login into the FTP server.

-Password: Enter the password to login into the FTP server.

-Directory Path: Enter the destination folder for uploading the images. For example, /Test/.

-Passive Mode: Select the Enable option to enable passive mode. If you are having trouble, you can enable/disable this mode.

- 32 -

Image 33

Contents User’s Manual CH Apter Softw are Inst ALL Ation CH Apter Introduction to Your Camera Checking the Package ContentsGetting to Know Your Camera Front ViewPage Features and Benefits System Requirement Accessing the Camera using Web BrowserNetworking RAM 512MBInstalling the Wall Mount Kit Chapter Hardware InstallationConnecting the Camera to LAN/WLAN Applications of the Camera Click on Install Utility and Software Installing SkyIPCam UltraViewPage Configuring the Camera Page Page Page Viewing Images Method a Access Camera from SkyIPCam UtilityPage Page Basic Setup Using the Web ConfigurationBasic System BasicDate & Time Basic Date & TimeBasic User AdministratorGeneral User GuestNetwork Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter Start/End IP AddressDeny IP List WPA2-PSK Network Wireless SettingPage Network Wireless WPS Setting Select PIN ModeSelect PBC Mode Recommended Pan & Tilt Pan & Tilt Settings Pan/Tilt SettingsImage Setting Setting up Video & AudioOverlay Setting Video & Audio CameraMjpeg Video & Audio VideoVideo & Audio Audio Camera MicrophoneCamera Speaker Out Event Server Setting FTP Event Server ConfigurationEvent Server Setting Email Motion Detect Event Configuration General Setting Event ConfigurationEvent Configuration Arrange Schedule Profile Event Configuration Motion Detection Trigger Event Configuration Gpio Trigger Event Configuration Schedule TriggerSystem Reboot Factory ResetConfiguration Update FirmwareInformation Device InfoSystem Log Starting the Program Chapter Using Skyipcam UltraviewMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Adding a Camera Accessing the CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Enabling / Disabling Recording Recording / Playing VideoConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap User Management Configuring the SystemConfiguring Event Trigger Setting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Humidity Connector Pin Assignment Interface SchematicGpio Terminal Application Numbers Glossary of TermsHEX Java Smtp WEP Technical Support