Whirlpool CA15WYR0 manual Position the Air Conditioner in Window, Correct Installation, Front View

Position the Air Conditioner in Window

■Handle air conditioner gently.

■Be sure your air conditioner does not fall out of the opening during installation or removal.

■Do not block the louvers on the front panel.

■Do not block the louvers on the outside of the air conditioner.

WARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

1.Put air conditioner on SMART-MOUNT®tray. Check that feet on bottom of air conditioner are behind and against back side of windowsill. Lower window sash.

A

B

A. Window sash

B. Feet on bottom of air conditioner behind back side of windowsill

2.If window sash does not close flush against rear surface of top channel, remove air conditioner and adjust SMART-MOUNT®tray until window sash closes flush against rear surface of top channel.

IMPORTANT: The tray must slope downward slightly toward the outside to provide proper drainage for the air conditioner.

Correct Installation

A

B

C

A. Window sash

B. Top channel

C. Air conditioner

If your air conditioner looks like either of the illustrations in the “Incorrect installation” graphic, SMART-MOUNT®tray needs adjustment.

Incorrect Installation

AB

B

C

A. Window sash

B. Top channel

C. Air conditioner

3.If the bottom of the air conditioner does not sit against the bottom of the SMART-MOUNT®tray, remove air conditioner and adjust angle of tray until air conditioner sits against the bottom of the tray.

IMPORTANT: The tray must slope downward slightly toward the outside to provide proper drainage for the air conditioner.

A

B

A. Air conditioner sitting on SMART-MOUNT®tray

B. SMART-MOUNT®tray

Attach Side Curtains to Window

1.Pull left-hand curtain frame out until it fits into the window channel. Repeat with right-hand curtain frame.

2.Insert one of the #8 x ³⁄₄" round-head screws through left- hand curtain frame and into the window channel to fasten the curtain frame to the window.

3.Repeat for right-hand curtain frame.

Front View

A

B

A

B

C

A. Hole for #8 x ³⁄₄" round-head screw

B. Side curtain

9