
Attach Support Legs
1.Determine the correct slots on the tray side from the type of exterior construction of the building.
Thin wall construction (vinyl, wood, etc.)
A
A. First and second slots
Thick wall construction (brick)
A
A. Second and third slots
2.Insert carriage bolt up through slot on
3.Place one end of tray center over carriage bolt.
4.Then place flat washer, lock washer and hex nut.
NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.
A
B
C
D
| E |
A. Hex nut | D. Tray center |
B. Lock washer | E. Carriage bolt |
C. Flat washer |
|
5.Insert second carriage bolt through tray side and attach other end of support leg.
NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.
A
B
C
| D |
A. Hex nut | C. Flat washer |
B. Lock washer | D. Carriage bolt |
6.Install support leg on other side.
Install SMART-MOUNT® Tray Assembly in Wall Opening
1.From inside, place
12