
To set Timer to turn on air conditioner, changing the previous settings:
1.Turn on air conditioner.
2.Adjust Mode to Auto Cool, Cool, Fan Only, or Power Saver. NOTE: For Auto Cool mode, go to Step 4.
3.For Cool, Fan Only or Power Saver mode, adjust Fan Speed to Turbo, High or Low.
4.Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5.Wait 3 seconds before turning off air conditioner.
6.Press TIMER. Timer indicator light on air conditioner will flash. Hour indicator light on air conditioner will turn on, and display on air conditioner will show remaining hours before air conditioner will turn on.
7.Press the plus or minus button to change delay time (1 to 24 hours).
8.Press TIMER again or wait 10 seconds. Timer indicator light on air conditioner will remain on. Hour indicator light on air conditioner will turn off, and Room indicator light on air conditioner will turn on. Display on air conditioner will show current room temperature.
Starting Your Air Conditioner—Rotary Control
Models Without Power Saver
Exhaust Control (on some models)
Push the Exhaust control CLOSED for maximum continuous cooling. Pull the Exhaust control OPEN to allow you to draw stale or smoky air from the room.
■
■
Models With Power Saver
1.Remove clear protective film from front panel badge (on some models).
2.Set exhaust control. See “Exhaust Control (on some models).”
3.Select the fan speed. See “Fan Speed.”
4.Select temperature. See “Temperature.”
NOTE: The Exhaust control will function only when the Fan Speed control is operating.
Fan Speed
Set FAN SPEED to the desired setting. When the air conditioner is operating at Low Cool, High Cool, or Turbo Cool, the fan circulates air continuously.
■Turbo
■High
■Low
■Fan
■Power Saver (on some
Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.
NOTE: Fan runs on Low speed only.
18