R41A0K180 User’s Guide
❏Place the AC adapter near an electrical outlet where the power cord can be easily unplugged.
❏The AC adapter and power cable provided are designed for use with the viewer. Do not attempt to use them with other electronic devices unless specified.
❏Do not remove the AC adapter from the viewer during operations (connecting the AC adapter during operations is possible).
❏The AC adapter included is designed for use with the viewer. Use of any other adapter could result in fire, electrical shock, or injury.
❏Use only AC adapter model A351H with the viewer.
❏Make sure the total amperage of all devices plugged into the power outlet does not exceed the power outlet’s ampere rating.
❏Do not connect the AC adapter when the battery is not installed. Otherwise, the viewer may be damaged.
❏If you plan to use this product in Germany, the building installation must be protected by a 16 amp circuit breaker to provide adequate
❏Do not use a damaged or frayed AC adapter.
❏If you use an extension cord with the viewer, make sure the total amperage of all devices plugged into the extension cord does not exceed the cord’s amperage rating.
❏Never disassemble, modify, or attempt to repair the AC adapter by yourself except as specifically explained in this guide.
❏Do not use power outlets controlled by wall switches or automatic timers.
❏Do not use power outlets on the same circuit as large motors or other appliances that may cause voltage fluctuations.
❏Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
❏To prevent fire or electric shock, do not cover the AC adapter with a blanket or similar covering.
❏Position the viewer’s power cable so that it will not be stepped on or run over.
❏Do not place any objects on the power cable and the AC adapter.
❏Keep the power cable straight at the ends and at the points where it enters the transformer.
Safety Instructions 14