R41A0K180 User’s Guide
❏The power cable should be placed so as to avoid abrasions, cuts, fraying, crimping, kinking, and other damage.
❏If the AC plug does not fit your outlet, have a proper outlet installed by a qualified electrician.
❏Remove the AC plug from the outlet during lightning storms.
For US and Canadian users:
Use the included power cord or a 6 to 10 foot
When using a memory card
❏Only memory cards designed for the viewer’s specifications can be used.
❏Do not remove a memory card or turn off the viewer while the Access lamp is flashing. See "Parts" on page 19 to find where the Access lamp is.
When using the LCD
❏The LCD panel on the viewer may contain a few small bright or dark spots. These are normal and do not mean that your LCD panel is damaged in any way.
❏If the LCD panel on the viewer is damaged, consult your dealer.
❏If the liquid crystal solution contained in the LCD panel on the viewer leaks out and gets onto your hands, wash them thoroughly with soap and water. If it gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.
❏Only use a soft, dry cloth to clean the display. Do not use liquid or chemical cleaners.
When storing, maintaining, or transporting the viewer
❏Do not store the viewer outdoors.
❏Do not store the viewer near water.
❏Do not store the viewer in a location subject to high temperature or humidity.
❏Do not store the viewer in a location subject to rapid changes in temperature or humidity.
❏Do not store the viewer in a location subject to direct sunlight or strong light sources.
Safety Instructions 15