Kodak EX1011, EX811 manual Problem Possible causes and/or solutions

	Troubleshooting and support
Problem	Possible causes and/or solutions
(Continued from previous	■ Make sure the network profile settings on your frame match
table)	those of the network. In an Infrastructure network, you can
Frame cannot connect to	usually view the network settings with the software program
	included with the router or through the interface of a
the wireless network —
	connected device. See the router or device documentation for
“Wireless network not	details.
found” appears.	If possible, note the following settings for the network, then
	change the profile settings on your frame to match them:
	– SSID
	– Wi-Fi mode (Infrastructure)
	– Security (none, WEP, or WPA-PSK)
	– Dynamic IP (yes or no)
	– Connect Mode (yes - ask before connecting, or no -
	connect automatically)
	– Router set up for MAC address access? Add frame MAC
	address to router access list.
	NOTE: Many wireless network routers employ the use of a WEP passphrase
	for generating a WEP security key code. If WEP security is enabled for
	the network, make sure the key code, not the passphrase, is entered in
	the security settings for the network profile on the camera.

www.kodak.com/go/support 37