Kenwood XD-9581MD Before applying power, Safety precautions, For the United Kingdom

Page 2

2Before applying power

Caution : Read this page carefully to ensure safe operation.

XD-9581MD (En)

Units are designed for operation as follows.

Europe and U.K

AC 230 V only

Preparation section

For the United Kingdom

Factory fitted moulded mains plug

1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS 1362) fuse.

2.The fuse cover must be refitted when replacing the fuse in the moulded plug.

3.Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach.

A power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent.

Connection to the mains supply.

IMPORTANT : The wires in the mains lead are coloured in accordance with the following code :

Blue : Neutral

Brown : Live

Do not connect those leads to the earth terminal of a three-pin plug.

Basic section

Application section

 

Safety precautions

WARNING

 

 

 

 

 

: TO PREVENT FIRE OR ELECTRIC SHOCK,

 

 

 

 

 

DO NOT EXPOSE THIS APPLIANCE TO

 

 

 

 

 

RAIN OR MOISTURE.

 

 

 

 

 

 

 

 

 

 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

 

 

 

CAUTION

 

 

 

 

 

 

 

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALI-

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

 

 

FIED SERVICE PERSONNEL.

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

 

 

 

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-

 

 

 

 

TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”

 

 

 

 

WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE

 

 

 

 

A RISK OF ELECTRIC SHOCK TO PERSONS.

 

 

 

 

 

 

 

 

 

 

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER

 

 

 

 

TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS

 

 

 

 

IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Knowledge sections

REQUIREMENT BY NEDERLAND GAZETTE

Batteries are supplied with this product. When they empty, you should not throw away. Instead, hand them in as small chemical waste.

The marking of products using lasers

(Except for some areas)

CLASS 1

LASER PRODUCT

The marking is located on the rear panel and says that the com- ponent uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents XD-9581MD Marking of products using lasers Except for some areas Before applying powerSafety precautions For the United KingdomContents Knowledge sectionConvenient timer functions Special features An MD recorder is standard equipmentVersatile tone and sound field adjustment Sampling FrequenciesHandling of Mini Disc Disc handling precautionsHandling of discs System connection Digital output terminal Speaker leftSpeaker Section Speaker cord Digital input terminalSuper woofer SW-500 optional BeforeSystemapplyingconnectionpowerSuper-Woofer Operation FM outdoor antennaSystem control cable Cassette deck X-H9 optionalAudio cord Optical Optical Digital input terminalControls and indicators Tuner/equalizer sectionSpectrum analyzer display Controls and indicatorsDisplay Tuner/equalizer section Amplifier section 1ON/STANDBYCD player section MD recorder section Display MD recorder section Peak level meter displayRemote control unit Operation Operation of remote control unitLoading batteries Remove the cover Insert batteries Close the coverLets put out some sound Basic use methodAuto Power Save function Muting the sound temporarily only on the remote controlListening through headphones Standby modePlayback of CD Lets put out some soundTo fast forward and backward Skipping tracksPlayback from desired track To pause playbackPlayback of Mini Disc To pause playback To stop playback Disc recorded in monaural modeSearching in a track Regard to display scrollingPress the Title Search key Confirm that the PGM indicator is not litRegard to automatic title search Select the desired titleElapsed time of track being played Regard to the Time Display keyRegard to Display key Peak level meter independent L and R indicationReceiving broadcast station Select the tuning mode Collective presetting of stations auto presetOne-by-one presetting manual preset AUX Lets recordRecording on MD TapeAlways remove the minidisc after recording Pause the recordingStop the recording Regard to display messages Tips for recording from a CD How to use the REC Input keyHow to use the AUTO/MANU. Key Playback of CD Listening in the desired sequence program playbackTo add a track to the program To quit the program modeTo check the programmed tracks 1Select the discRepeated playback To stop repeated playbackPress so that the Random indicator goes off Confirm that the PGM indicator is not litSelect the Random mode Please select the disc before selectingStart playback 1Let the PGM indicator lightPlayback of MD @ 0 0Clearing tracks from the end Checking the order of tracksTo clear tracks from the program Clearing all tracksDesired sequence Let the Repeat indicator light Press the Repeat key againPlayback of MD To switch the display contents S. Radio Data System2Select the desired program type Select the PTY search modeSearching for a desired program type PTY search To change to a different program type When a station is receivedStart the search Repeat steps 1, 2Select the desired information Auto preset the stationsSelect a station where RDS and EON are lit Receive an RDS stationRegard to TP Traffic Program indicator Wait for the desired informationConvenient function Convenient recording methodsSelection of the recording type Convenient recording methodsOne-touch recording of one CD, MD When a desired track is found, only that track is recordedFade-in/fade-out Recording of one CD or several CDs CD =MD p CD =TAPE QTo interrupt a recording Make the preparations for recordingStart recording Press during playback Playback of a CD or MDAt the end of the recording Twin Recording Function Press the Twin REC keyProducing an MD or a tape collecting only the first titles Press the Best Hits keyWithin 8 seconds 4Start edit recordingSelect the disc Repeat key is not effective3Start edit recording To check the edited contents To clear the edited contentsRecording of one CD or several CDs CD =TAPE To stepEnter the disc and tape conditions Make sure that the PGM indicator is offLight the Edit indicator Start edit recordingAutomatic Space Function To check the edited contentsTo clear the edited contents Select the disc Make sure that the PGMindicator is offFade-out/Fade-in at the tape reversal CD =TAPE only Erasing tracks MD edit functionsDividing a track, combining two tracks MD edit functionsInput the title Activate the title input modeAssigning a title to a disc or track Execute title assignmentExecute title change or deletion Changing or deleting a titleTotal number of title characters Character Track Edit2Select the range of tracks to be reordered Moving several tracks at a time Quick Move1Select Q.MOVE Execute the track move operationSelect the track to be moved Moving a single track Track MoveSelect Move Select the moving destination trackDivide ? Dividing a track Track DividePlay the track to be divided Preview functionTitle division image Execute the track divide operationAfter editing, eject and remove the mini disc Disc Writing displayed during the mini disc ejection2Select the track to be combined Combining two tracks Track CombineSelect Combine Execute the track combine operationSelect the titles to be erased Erasing several tracks at a time Quick Erase1Select Q.ERASE Execute the erase operationTo erase all tracks ALL Erase 2Select the Erase modeMake the preparations To erase one track Track Erase Track Erase ALL EraseExecute Track Erase Once Erasing a part of a trackTrack Divide P Enjoying sound field effects Switch on SRS 3DAdjust the effect strength level Listening with the desired sound equalizer function Equalizer frequency band adjustmentEffective sound field and sound quality adjustment Select Tape adjustment or AUX ad- justment Select balance adjustment2Adjust AdjustSwitching the spectrum analyzer display Multi-function display switching demonstration functionSwitching the superposed display 2Enter the figure of hour Clock adjustmentActivate the clock adjustment mode 3Enter the figure of minuteSleep timer Timer operationOperate easy To use Timer O.T.T To cancel4Select a program No 2Adjust the listening volumeMake preparations for the play recording Enter the OFF Standby time Select the timer program No. to be usedEnter the on time Make the desired reservationWhen timer operation is not required Check the reservation contentTo change the reserved contents To set the same timer program againAdjust the clock before setting the timer Regard to contact cleaners MaintenanceMaintenance of the Set Important itemsMD system CaseImportantof difficultyItemsScms Serial Copy Management System Digital recording and ScmsDigital copy can- not be repeated Case of difficulty Operation to resetSymptom Cause Remedy Amplifier section/SpeakersMD recorder section other symptoms Symptom CauseTitle Full Disc ErrorNo Disc Blank DiscRemote control unit CD player sectionSpecifications Tuner/equalizar unit C-H7 / Amplifier unit A-H5For your records CD player unit DP-MH5Speakers LS-J6
Top Page Image Contents