
Convenient recording methods 47
When a desired track is found, only that track is recorded
(One-touch edit recording of one track)
While listening to a CD or MD, it is possible to record only the track being heard at that time from the beginning of that track. Recording is possible to tape or MD from CD and to tape from MD.
For recording to tape, please read “Let's record” in the operation manual of the cassette deck
1Make the preparations for recording.
CD =MD
1Insert a recordable disc into the MD recorder.
2Select “CD” with the input selec- tion key.
3Insert disc(s) in the CD player.
)
MD =TAPE
1Load a tape.
2Select the tape transport direction.
(2 or 3)
3Select “p”.
4Select the Dolby NR mode.
5Select “MD” with the input selec- tion key.
6Insert disc(s) in the MD recorder.
ª
7Adjust the recording level.
CD =TAPE
1Load a tape.
2Select the tape transport direction.
(2 or 3)
3Select “p”.
4Select the Dolby NR mode.
5Select “CD” with the input selec- tion key.
6Insert disc(s) in the CD player.
)
7Adjust the recording level.
Preparation section
2Playback of a CD or MD.
3Press the O.T.E. key during playback of a track to be recorded.
CD =MD | MD =TAPE |
O.T.E. |
|
| MDTAPE |
Press during playback. | Press during playback. |
CD =TAPE
CDTAPE
Press during playback.
Basic section
Application
ÖReturn is made to the beginning of the track being played and recording starts.
At the end of the recording
MD recorder : Stop.
Cassette deck : Stop is executed after an unrecorded portion of about 4 sec. has been produced.
The unit on the playback side (CD player or MD recorder) pauses.
To record another track ... repeat the steps 2 and 3.
section
To interrupt a recording
CD =MD | Goes off |
| |
7 | 6 |
MD =TAPE |
|
7 | 3 |
CD =TAPE | Goes off | Knowledge |
| sections | |
7 | 6 | |
|
|
ÖRecording and playback will be stopped.