Kenwood XD-9581MD Pause the recording, Stop the recording Regard to display messages

Page 29

Let's record

XD-9581MD (En)

29

Pause the recording

¦ 8

ÖPress the key again to resume recording. At this time, the track number is incremented by “1”.

ÖRecording can also be started by pressing the record (¦) key.

Stop the recording

73

In regard to display messages

Recording is not possible when one of the following messages is displayed.

“DISC FULL”	: The minidisc is full.
	\ Erase unrequired tracks. ä
“PROTECTED”	: The write protect tab is open.
	\ Close it.	5
“UNRECORDABLE”	: The minidisc is only for playback.
	\ Insert a recordable disc. j

Sampling Frequencies

Normally the following three types of digital signals are used and they are called sampling frequencies.

48kHz 44.1 kHz

32kHz

As this unit has a built-in sampling rate converter, digital signals of 32 kHz and 48 kHz are converted to 44.1 kHz for recording.

Preparation section

		ER/R	EC
	CT		EC	L
A				L	E
R					E
A					V
H						E
H						L
C
@
@
@
@
4						¢
−						+

		4
	Level decreases		Level increases
	Level value
	18 15 12 9 7 5 3 1	0 OVER(-dB)
	Display on the MD
	Display on the MD	0dB
	recorder section	0dB
	recorder section

¦ 8

5

EJECT

0

6

		Basic section
4. Adjust the recording level (only analog recording).

1Play the source to be recorded.

2Set to recording pause.

Always press the record (¦) key in stopped condition, and then press

the pause (8) key.

3Adjust the recording level.	ÖAdjustment is possible in the range from -∞dB
	to 0 dB (81steps).
	Applicationsection
	ÖAdjust so that 0 dB lights only once in a while.
	ÖLower the level when the red part of the level
	meter lights.

5. Start recording.

1Press the record (¦) key.	ÖDuring recording, the EJECT (0) key will not be
	accepted.

2Play the music source to be recorded. ÖTo start recording simultaneously with CD play- back, please read ”Tips for recording from a

	CD“.	¼	Knowledge
	CD“.	¼
6.	Always remove the minidisc after recording.		sections
6.	Remove the minidisc after the end of recording.

“DISC WRITING” displayed during the minidisc ejection operation indicates that the data associated with recording or editing is being written on the disc. Do not apply vibration or shock to the unit while this message is displayed.

Image 29

Contents XD-9581MD Safety precautions Before applying powerMarking of products using lasers Except for some areas For the United KingdomKnowledge section ContentsVersatile tone and sound field adjustment Special features An MD recorder is standard equipmentConvenient timer functions Sampling FrequenciesHandling of Mini Disc Disc handling precautionsHandling of discs System connection Speaker Section Speaker cord Speaker leftDigital output terminal Digital input terminalSuper-Woofer Operation BeforeSystemapplyingconnectionpowerSuper woofer SW-500 optional FM outdoor antennaAudio cord Cassette deck X-H9 optionalSystem control cable Optical Optical Digital input terminalTuner/equalizer section Controls and indicatorsSpectrum analyzer display Controls and indicatorsDisplay Tuner/equalizer section 1ON/STANDBY Amplifier sectionCD player section MD recorder section Peak level meter display Display MD recorder sectionRemote control unit Loading batteries Operation of remote control unitOperation Remove the cover Insert batteries Close the coverBasic use method Lets put out some soundListening through headphones Muting the sound temporarily only on the remote controlAuto Power Save function Standby modeLets put out some sound Playback of CDPlayback from desired track Skipping tracksTo fast forward and backward To pause playbackPlayback of Mini Disc Searching in a track Disc recorded in monaural modeTo pause playback To stop playback Regard to display scrollingRegard to automatic title search Confirm that the PGM indicator is not litPress the Title Search key Select the desired titleRegard to Display key Regard to the Time Display keyElapsed time of track being played Peak level meter independent L and R indicationReceiving broadcast station Select the tuning mode Collective presetting of stations auto presetOne-by-one presetting manual preset Recording on MD Lets recordAUX TapeAlways remove the minidisc after recording Pause the recordingStop the recording Regard to display messages Tips for recording from a CD How to use the REC Input keyHow to use the AUTO/MANU. Key Listening in the desired sequence program playback Playback of CDTo check the programmed tracks To quit the program modeTo add a track to the program 1Select the discTo stop repeated playback Repeated playbackSelect the Random mode Confirm that the PGM indicator is not litPress so that the Random indicator goes off Please select the disc before selectingPlayback of MD 1Let the PGM indicator lightStart playback @ 0 0To clear tracks from the program Checking the order of tracksClearing tracks from the end Clearing all tracksPress the Repeat key again Desired sequence Let the Repeat indicator lightPlayback of MD S. Radio Data System To switch the display contents2Select the desired program type Select the PTY search modeSearching for a desired program type PTY search Start the search When a station is receivedTo change to a different program type Repeat steps 1, 2Select a station where RDS and EON are lit Auto preset the stationsSelect the desired information Receive an RDS stationWait for the desired information Regard to TP Traffic Program indicatorSelection of the recording type Convenient recording methodsConvenient function Convenient recording methodsFade-in/fade-out When a desired track is found, only that track is recordedOne-touch recording of one CD, MD Recording of one CD or several CDs CD =MD p CD =TAPE QTo interrupt a recording Make the preparations for recordingStart recording Press during playback Playback of a CD or MDAt the end of the recording Press the Twin REC key Twin Recording FunctionPress the Best Hits key Producing an MD or a tape collecting only the first titlesSelect the disc 4Start edit recordingWithin 8 seconds Repeat key is not effectiveRecording of one CD or several CDs CD =TAPE To check the edited contents To clear the edited contents3Start edit recording To stepLight the Edit indicator Make sure that the PGM indicator is offEnter the disc and tape conditions Start edit recordingAutomatic Space Function To check the edited contentsTo clear the edited contents Select the disc Make sure that the PGMindicator is offFade-out/Fade-in at the tape reversal CD =TAPE only Dividing a track, combining two tracks MD edit functionsErasing tracks MD edit functionsAssigning a title to a disc or track Activate the title input modeInput the title Execute title assignmentTotal number of title characters Changing or deleting a titleExecute title change or deletion Character Track Edit1Select Q.MOVE Moving several tracks at a time Quick Move2Select the range of tracks to be reordered Execute the track move operationSelect Move Moving a single track Track MoveSelect the track to be moved Select the moving destination trackPlay the track to be divided Dividing a track Track DivideDivide ? Preview functionAfter editing, eject and remove the mini disc Execute the track divide operationTitle division image Disc Writing displayed during the mini disc ejectionSelect Combine Combining two tracks Track Combine2Select the track to be combined Execute the track combine operation1Select Q.ERASE Erasing several tracks at a time Quick EraseSelect the titles to be erased Execute the erase operationMake the preparations To erase one track Track Erase 2Select the Erase modeTo erase all tracks ALL Erase Track Erase ALL EraseExecute Track Erase Once Erasing a part of a trackTrack Divide P Enjoying sound field effects Switch on SRS 3DAdjust the effect strength level Listening with the desired sound equalizer function Equalizer frequency band adjustmentEffective sound field and sound quality adjustment 2Adjust Select balance adjustmentSelect Tape adjustment or AUX ad- justment AdjustSwitching the spectrum analyzer display Multi-function display switching demonstration functionSwitching the superposed display Activate the clock adjustment mode Clock adjustment2Enter the figure of hour 3Enter the figure of minuteOperate easy To use Timer O.T.T Timer operationSleep timer To cancel4Select a program No 2Adjust the listening volumeMake preparations for the play recording Enter the on time Select the timer program No. to be usedEnter the OFF Standby time Make the desired reservationTo change the reserved contents Check the reservation contentWhen timer operation is not required To set the same timer program againAdjust the clock before setting the timer Maintenance of the Set MaintenanceRegard to contact cleaners Important itemsCaseImportantof difficultyItems MD systemScms Serial Copy Management System Digital recording and ScmsDigital copy can- not be repeated Symptom Cause Remedy Operation to resetCase of difficulty Amplifier section/SpeakersSymptom Cause MD recorder section other symptomsNo Disc Disc ErrorTitle Full Blank DiscCD player section Remote control unitTuner/equalizar unit C-H7 / Amplifier unit A-H5 SpecificationsFor your records CD player unit DP-MH5Speakers LS-J6