4 Setting Up
Using the Setup Navigator
Before playing any discs, we strongly recommend using the Setup Navigator. This makes all the basic DVD system settings for you.
DVD SETUP
5
2 ENTER 3
∞
7
1Make sure that the system is switched on.
Also turn on your TV and make sure that it is set to the correct video input.
• If a disc that’s already loaded starts to play, press 7 to stop it.
2Press DVD SETUP.
The Setup Navigator on-screen display (OSD) appears:
Video Language General
Setup Navigator
Setup Navigator Start
Auto Start Off
Setup using the Setup Navigator
Move ENTER Select SETUP Exit
Navigate all of the following OSDs using these controls:
5, ∞ – cursor up/down
ENTER – select the highlighted menu option
2– go back to the previous question
The control possibilities for the current OSD are shown at the bottom of each screen.
18
3Select START.
• If you decide not to use the Setup Navigator, select
Auto Start Off here instead.
4 Choose an OSD menu language.
Video Language 
General
Setup Navigator
Language English
OSD Language français
Español
Select the On Screen Language
Move |
| Select |
| Exit |
5 Select the type of TV you have.
Video Language 
General
Setup Navigator
TV Connection
TV Type Widescreen (16:9)
Standard (4:3)
Widescreen TV 16:9 aspect ratio
Move ENTER Select SETUP Exit
•See Aspect ratio in the glossary on page 42 if you’re unsure of the difference between widescreen and standard TVs.
6 Select Save Changes to make the settings.
Video Language 
General
Setup Navigator
Save Changes
Exit Setup Navigator Delete Changes
Start Again
Changes are saved
Move ENTER Select SETUP Exit
7Press DVD SETUP to exit.
Congratulations, set up is complete!
If you want to use the Setup Navigator again at any time, it is available from the General menu. Also, each individual setting can be changed using the appropriate menu
En