Panasonic TH37PR11UK PC Input Terminals connection, Signal Names for Mini D-sub 15P Connector

Page 10

Connections

PC Input Terminals connection

COMPUTER

Conversion adapter (if necessary)

RGB

(Female)

AUDIO

PC IN

Mini D-sub 15p

PC cable

(Male)

Audio

Stereo plug

Connect a cable which matches

the audio output terminal on the computer.

Notes:

•Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

•The display resolution is a maximum of 768 × 720 dots (TH-37PR11UK/H), 768 × 768 dots (TH-42PR11UK/H) when the aspect mode is set to “4:3”, and 1,024 × 720 dots (TH-37PR11UK/H), 1,024 × 768 dots (TH-42PR11UK/H) when the aspect mode is set to “FULL”. If the display resolution exceeds these maximums, it may not be possible to show ﬁne detail with sufﬁcient clarity.

•The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection.

•Some PC models cannot be connected to the set.

•There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

•The computer shown in the illustration is for example purposes only.

•Additional equipment and cables shown are not supplied with this set.

•Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speciﬁed frequency range.

•Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector.

•Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT” (when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 30)

Signal Names for Mini D-sub 15P Connector

5 4 3 2 1

10		9		8	7	6
15	14		13	12		11

Pin Layout for PC Input Terminal

Pin No.	Signal Name	Pin No.	Signal Name	Pin No.	Signal Name
1	R (PR/CR)	6	GND (Ground)	11	NC (not connected)
2	G (Y)	7	GND (Ground)	12	SDA
3	B (PB/CB)	8	GND (Ground)	13	HD/SYNC
4	NC (not connected)	9	+5 V DC	14	VD
5	GND (Ground)	10	GND (Ground)	15	SCL

10

Image 10

Contents English Español Operating Instructions Manual de instruccionesModel No. Número de modelo Risk of Electric Shock Do not Open Important Safety Instructions Table of Contents Canadian Notice FCC CautionTrademark Credits Safety Precautions When using the Plasma DisplayAC Power Supply Cord MaintenanceSetup If problems occur during useAccessories Supplied AccessoriesCheck that you have the Accessories and items shown AC cord ﬁxing ConnectionsCable ﬁxing band Signal Names for Mini D-sub 15P Connector PC Input Terminals connectionSerial Terminals connection Signal names for D-sub 9P connectorCommand Communication parametersConnecting the AC cord plug to the Plasma Display Power on / OFFConnecting the plug to the Wall Outlet Selecting the On-Screen Menu Language Selecting the input signalInitial selections INPUT1 INPUT2 INPUT3 PCBasic Controls On OFF Aspect Controls All Aspect modePanasonic Auto Multi PIP Advanced PIP Position Digital ZoomDisplay the operation guide Select the magniﬁcation required for the enlarged displayOn-Screen Menu Display Adjusting POS. /SIZE Dynamic Picture AdjustmentsStandard CinemaAdvanced Settings Sound Adjustment Press to exit from adjust modeSET UP Timer Present Time SetupPresent Time Setup Screensaver For preventing image retention Setup of Screensaver TimeStart setting Function selectionReduces screen image retention Side BAR AdjustOFF Dark MID Bright Reduces power consumption PC/COMPONENT/RGB/DVD/STB Customizing the Input labelsINPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3 Addition sign Selected InputComponent / RGB in Select SET UP for Input SignalsYUV / RGB in Select 3D Y/C Filter For Ntsc AV images Signal menuWhen ON, this setting only affects Ntsc input signals For ComponentColor System / Panasonic Auto XGA ModeMode Function PulldownNoise Reduction Press to adjustRefresh Rate Advanced NRSetting RGB sync signal Input signal displaySync Options Adjustments Press to adjust the menu Press to exit from Options menuOptions Adjustments Normalization Program number Weekly Command TimerPress Action button Program Edit screenShipping condition Press to select Time / CommandTime Set the time to execute a command program Press to set each itemTroubleshooting Plasma Display panelList of Aspect Modes FullPC input signals RGBCommand list of Weekly Command Timer Speciﬁcations TH-37PR11UK/H TH-42PR11UK/HPanasonic Professional Flat Panel Display Limited Warranty For the U.S.ALimited Warranty Statement For CanadaPage Page Page Executive Ofﬁce Customer’s RecordPanasonic Professional Display Company Panasonic Canada Inc