Panasonic TH37PR11UK operating instructions Adjusting POS. /SIZE

Adjusting POS. /SIZE

1

2

3

Press to display the POS. /SIZE menu. Press to select the menu to adjust.

Press to adjust the menu.

During “VIDEO (S VIDEO)”, “Digital”, “SDI” and “HDMI” input signal.

POS. /SIZE

NORMALIZE		NORMAL
AUTO SETUP		0
	H-POS
	H-SIZE	0
	V-POS	0
	V-SIZE	0

During “COMPONENT”, “RGB” and “PC” input signal.

		POS. /SIZE
4		NORMALIZE NORMAL
		AUTO SETUP	0
	Press to exit from adjust mode.	H-POS
		H-SIZE	0
Notes:		V-POS	0
		V-SIZE	0
• Unadjustable items are grayed out.		DOT CLOCK	0
Adjustable items differ depending on the input signal and the display mode.		CLOCK PHASE	0

•Adjustment details are memorized separately for different input signal formats. (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the POS. /SIZE function.

•If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment.

AUTO Automatically adjust H-POS / V-POS / CLOCK PHASE / DOT CLOCK and set H-SIZE / V-SIZE the standard

SETUP value when RGB signal is input.

Notes:

•If the dot clock frequency is 108 MHz or higher, DOT CLOCK cannot be made.

•If the image is that the edge is hardly figured out or shadowy, that cannot be adjusted automatically. In such case, press AUTO SETUP again after changing the image to the clearer one.

•When DVI-D is input, CLOCK PHASE cannot be adjusted automatically.

•Select NORMALIZE in POS. /SIZE and press the ACTION () button when appropriate adjustment cannot be made.

H-POS Adjust the horizontal position. V-POS Adjust the vertical position.

H-SIZE Adjust the horizontal size. V-SIZE Adjust the vertical size.

DOT	(During “COMPONENT”, “RGB” and “PC” input signal)
CLOCK	Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens,
	adjust so that any such noise is minimized.
CLOCK	(During “COMPONENT”, “RGB” and “PC” input signal)
PHASE	Eliminate the flickering and distortion.

Helpful Hint ( /

NORMALIZE

Normalization)

While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

21