Philips 298P4, 298X4 MultiView selection menu appears Press or button to select, Detected, Source

2. Setting up the monitor

2.The MultiView selection menu appears.

Press ▲ or ▼ button to select.

 









3.Press button to confirm your selection and then exit automatically.

How to enable MultiView by OSD menu?

Besides pressing the hotkey directly on the front bezel, the MultiView function can also be selected in OSD menu.

1.Press button on the front bezel to enter OSD Menu Screen.

	 	
	 	
	 	

	 
	






2.Press ▲ or ▼ button to select main menu

[PiP / PbP], then press button.

3.Press ▲ or ▼ button to select [PiP / PbP

Mode], then press button.

4.Press ▲ or ▼ button to select [PiP] or [PbP].

5.Now you can move backward to set the

[PiP / PbP Input], [PiP Size], [PiP Position]., or [Swap].

6.Press button to confirm your selection.

MultiView in OSD menu

•PiP / PbP Mode:There are two modes for

MultiView: [PiP] and [PbP].

[PiP]: Picture in Picture
Open up a sub-window of
			B
another signal source.
	A (main)
When the sub source is not
			B
detected:
	A (main)
[PbP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
	A (main)	B
source.
When the sub source is not
detected:
	A (main)	B

Note

The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PbP mode.

•PiP / PbP Input:There are five different video input to choose as the sub display source: [VGA] (298P4QAJEB),[DVI], [HDMI 1], [HDMI 2], and [DisplayPort].

Please refer below table for compatibility of main/sub input source.

		SUB SOURCE POSSIBILITY (xl)
	Inputs	VGA	DP	DVI	HDMI	HDMI
					1	2
	VGA		●	●	●	●
MAIN	DP	●		●	●	●
SOURCE	DVI	●	●
(xl)	HDMI 1	●	●
	HDMI 2	●	●

11