Philips 298P4, 298X4 user manual Remove the Base Assembly for Vesa Mounting

2. Setting up the monitor

2.4Remove the Base Assembly for VESA Mounting

Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.

298P4:

1.Extend the monitor base to its maximum height.

2.Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.Then lift the monitor stand.

298X4:

1.Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.Then lift the monitor stand.

2.Use your fingers to loosen the screw located at the bottom of the base, and then remove the base from the stand.

2 1

3.While keeping the release button pressed, tilt the base and slide it out.

Note

This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface.

100mm

100mm

13