Programming the SWI-JACK to Work With the Vehicle
Step 5.
Refer to The Vehicle Application Guide. Note the INTERFACE Version Number next to the selected vehicle. Fill in the information below for quick reference. The Radio Select Switch must be set BEFORE programming the INTERFACE version number. Set the switch as follows: Alpine = 1, JVC = 2, Kenwood = 3, Clarion = 4 Valor = 5 OEM = 6 and Blaupunkt = 7
Version Number: ____________
(Write Version Number here)
SWI-JACK
IGN
ACC
STRT
OFF
Step 6.
Press and hold programming/ mode button on
SWI-JACK
The LED on the
Step 7.
Release the programming/ mode button.
SWI-JACK
SWI-JACKThe LED will turn off, indicating memory is cleared.
SWI- | Step 9. |
| |
JACK | Press and release the program- |
| |
| ming/mode button the same |
| number of times as the desired |
| version number. |
SWI- | After 3 seconds, the |
| |
JACK | LED will flash the same |
| |
| amount of times of set |
| version number. |
SWI- | The LED will flash |
| |
JACK | each time the button is |
| |
| pressed and released. |
ACC |
|
| Step 10. |
IGN |
| Turn vehicle ignition | |
|
| STRT | to OFF position. |
OFF |
|
| Vehicle programming |
|
|
| |
|
|
| sequence is complete. |