1.Turn on your receiver/amplifier and select the audio input to which you connected your CD changer (for example, CD, AUX, or TAPE).
2.Press PLAY 
to play the CD in the play position from Track 1. 
and EACH appear.
To select a different CD, see “Se- lecting a CD” on Page 12.
To select a different track see “Se- lecting a Track” on Page 12.
3.While a CD plays, the CD changer displays the current disc and track number, the elapsed time of the current track, and a music calen- dar that shows the total number of tracks on the CD (up to 20) with the current track number flashing.
illustration
When the CD changer finishes playing a track, that track’s num- ber disappears from the music calendar.
Repeatedly press TIME to display in order:
•The current track’s remaining time
•The total number of tracks on the CD and total playing time – TOTAL appears.
•The remaining number of tracks and total time remaining on the CD – TOTAL and REMAIN ap-
pear
• To return to the original display
Note: During playback, if the changer is subjected to a sudden shock or jolt, the rotation speed might change, or some noise might be produced. This is not a malfunction.
4. To temporarily stop playing, press PAUSE y . y appears. Press
PAUSE y again or PLAY 
to re- sume play.
illustration
Or, press STOP 
to stop play be- fore the last CD ends.
illustration
5.After the CD changer plays all tracks on the current CD, it auto- matically loads the next higher- numbered CD and plays all of its tracks. After it plays all tracks on the
11