Troubleshooting, Problem Suggestion | Optimus CD-8250 specs

42-5072.fm Page 18 Thursday, August 12, 1999 10:55 AM

TROUBLESHOOTING

With proper care and handling, your CD changer should give you years of trouble- free service. However, if your CD-8250 is not working properly, follow these sug- gestions to see if you can eliminate the problem. If you still have a problem, take the CD changer to your local RadioShack store for assistance.

Problem	Suggestion


Power is on but no indicators	Make sure the power cord is plugged into an
light.	AC outlet.

CD is loaded but play does not	The CD is loaded upside-down. Load the CD
start.	with the label side up.

	The CD is dirty or scratched. To clean the CD
	surface, use a CD cleaner kit (such as Cat. No.
	42-225). If the CD gets scratched, use Scratch
	’n Fix (RadioShack Cat. No. 42-127).

	The CD is not a standard (3- or 5-inch) com-
	pact disc. Load a standard size CD.

No sound.	The audio cable is not connected or is defec-
	tive. Check all connections and replace defec-
	tive cables, if necessary.

The sound is interrupted or the	The CD is scratched or dirty. If the CD gets
same part repeats.	scratched, use Scratch ’n Fix (RadioShack
	Cat. No. 42-127). To clean the CD surface, use
	a CD cleaner kit (such as Cat. No. 42-225).

Sound is distorted.	Moisture might be present on the pickup lens.
	Unplug the CD changer from power and wait 2
	hours for condensation to evaporate before
	resuming play.