Checking/Changing the Programmed Sequence
Press STOP 
to cancel the current function. Press MEMORY CHECK ( CHECK on the CD changer). The CD changer displays the programmed se- quence’s first selection. Each time you press MEMORY CHECK, the CD changer displays the next pro- grammed selection.
illustration
To change a selection, repeatedly press MEMORY CHECK until the CD changer displays the disc number and track number you want to change. En- ter the desired disc number and/or track number, then press MEMORY.
Adding to the Programmed Sequence
You can add individual tracks or entire CDs to the end of a programmed se- quence up to a total of 32 tracks.
1.Repeatedly press STOP 
until 0M00S appears. This cancels the current function.
2.Enter the desired disc number and/or track number, then press MEMORY. The CD changer adds the selection to the end of the pro- grammed sequence.
Erasing a Programmed Sequence
To erase the programmed sequence
from memory, press STOP 
then CLEAR. PROGRAM turns off. The se- quence is also erased when you turn off the CD changer.
illustration
17