PLAYING A SEQUENCE OF TRACKS
You can program up to 32 selections to play in any order you choose. A “se- lection” can be an individual track or an entire CD.
Follow these steps to program and play a sequence of tracks.
Hint: You can open the disc tray com- partment while you program the se- quence, so you can check the loaded CDs’ tracks.
1.Press STOP 
to cancel the cur- rent function.
2.Press DISC NO. (or DISC SKIP) to select a CD.
To enter all the tracks on a CD as one selection, skip to Step 4.
3.Press TRACK NO. (or 
or 
) to select a track.
4.Press MEMORY to store the selec- tion into memory. PROGRAM ap- pears and the time display shows the disc number and track number (A when you programmed all tracks on a CD) along with
illustration
Note: If you enter a track number higher than the highest track on a CD, this entry is ignored during programmed play.
16
5.Repeat Steps
Note: If you try to store more than 32 selections, the CD changer briefly displays FULL.
6.Press PLAY 
to play the se- quence. If you programmed indi- vidual tracks, the music calendar displays the number of pro- grammed tracks, with the current track number flashing. If you pro- grammed an entire CD, the music calendar displays only the current track playing.
After the CD changer plays all programmed tracks, it stops and
ory, so you can press PLAY 
to replay the sequence.
Notes:
•You can use 
or 
, SEARCH
or 
, INTRO SCAN, REPEAT, and SHUFFLE during programmed play.
•You cannot use the DISC SKIP,
DISC NO., or TRACK NO. buttons during programmed play.