Sharp PN-V600 Menu Items, Displaying the menu screen, NExample of operation, NMenu screen display

Menu Items

Displaying the menu screen

Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 23 to 27 for details of each menu items.

Caution

•Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings.

nExample of operation

(Adjusting CONTRAST in the PICTURE menu)

1. Press MENU to display the menu screen.

SCREEN	SCREEN		1/1	PC D-SUB
	AUTO
PICTURE			600
	CLOCK
AUDIO	PHASE		25
SETUP	H-POS		610
	V-POS		37
OPTION	H-SIZE		50
	V-SIZE		50
MULTI	H-RESOLUTION		1366
	V-RESOLUTION		768
PIP/PbyP
	RESET
				END···[MENU]
	1 3 6 6 x 7 6 8
		V: 60 Hz		H: 47.7 kHz

2.Press or to select PICTURE, and press .

3.Press or to select CONTRAST.

SCREEN	PICTURE		1/2		PC D-SUB
PICTURE	AUTO		64
	ANALOG GAIN
AUDIO	ANALOG OFFSET		86
	BRIGHT		31
SETUP
	CONTRAST		30
	BLACK LEVEL		30
OPTION
	TINT		30
MULTI	COLORS		30
	SHARPNESS		12
PIP/PbyP	RGB INPUT RANGE			FULL
	MOVE OSD···[DISPLAY]				OK···[MENU]
	1 3 6 6 x 7 6 8	V: 60 Hz		H: 47.7 kHz

4. Press		or	to adjust the setting.
	SCREEN	PICTURE		1/2	PC D-SUB
	PICTURE		AUTO	64
			ANALOG GAIN
	AUDIO		ANALOG OFFSET	86
			BRIGHT	31
	SETUP
			CONTRAST	40
	OPTION		BLACK LEVEL	30
			TINT	30
	MULTI		COLORS	30
			SHARPNESS	12
	PIP/PbyP		RGB INPUT RANGE	FULL

MOVE OSD···[DISPLAY]		OK···[MENU]
1 3 6 6 x 7 6 8	V: 60 Hz	H: 47.7 kHz
For items that have	, press	, make settings and then
press MENU.

5. Press MENU twice to close the menu screen.

TIPS

•The menu will differ depending on the input mode.

•The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING, SCHEDULE and LAN SETUP screens will close in about 4 minutes.)

nMenu screen display

	1		3		2
SCREEN	PICTURE			1/2	PC D-SUB
PICTURE		AUTO		64
		ANALOG GAIN
AUDIO		ANALOG OFFSET		86
		BRIGHT		31
SETUP
		CONTRAST		30
		BLACK LEVEL		30
OPTION
		TINT		30
MULTI		COLORS		30
		SHARPNESS		12
PIP/PbyP		RGB INPUT RANGE		FULL
	MOVE OSD···[DISPLAY]				OK···[MENU]	4
	1 3 6 6 x 7 6 8		V: 60 Hz H: 47.7 kHz

1Name of the menu

2 Input mode

3 An item being selected (highlighted)

4 Screen resolution of input signal, and other data.

TIPS

•Items that cannot be selected appear in gray.

(e.g. Function not supported by the current input signal)

nMenu Items

The displayed menu items vary depending on whether or not

the PN-ZB02 (optional) is attached.

The following menus will be displayed only when the PN-ZB02 (optional) is attached.

Menu	Item
PICTURE	ADVANCED	3D-Y/C
SETUP	HOT PLUG CONTROL	DVI
	RS-232C/LAN SELECT
	LAN SETUP
	AUTO ASSIGN FIXED IP ADDR.
OPTION	INPUT SELECT	DVI
		BNC
	AUDIO SELECT	PC DVI-D
		PC D-SUB
		PC RGB
		AV DVI-D
		AV COMPONENT
		AV S-VIDEO
		AV VIDEO
	COLOR SYSTEM
PIP/PbyP	PIP SOURCE

E22