Sharp PN-V602 Connecting Peripheral Equipment, Connection when the PN-ZB02 optional is attached

Expansion Board

When the PN-ZB02 (optional) is attached

156

Caution

•Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected.

•Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems.

TIPS

•Images may not be displayed properly depending on the computer (video card) to be connected.

•A screen with 1920 x 1080 resolution may not be displayed correctly on PC RGB. In this case, check the settings of your computer (video card) to verify that input signals conform to specifications of this monitor. (See page 57.)

•If there is a check box to disable EDID in display control panel, check it when using PC RGB.

•Use the automatic screen adjustment when a PC screen is displayed for the first time using PC D-SUB or PC RGB, or when the setting of the PC is changed. The screen is adjusted automatically when SELF ADJUST in the OPTION menu is set to ON.

•If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the monitor’s audio output to the speakers or other devices.

•The audio input terminals used in each input mode are factory-set as follows.

1. PC/AV HDMI input terminal

•Use a commercially available HDMI cable (conforming to the HDMI standard).

•Set HDMI of INPUT SELECT on the OPTION menu according to the device to be connected.

•Select the audio input terminal to be used in PC HDMI or AV HDMI of AUDIO SELECT on the OPTION menu. When HDMI is selected, connection to the audio input terminal is unnecessary.

2. PC D-sub input terminal

•Set D-SUB of INPUT SELECT on the OPTION menu according to the device to be connected.

•Common terminal for AV COMPONENT and AV VIDEO.

•When the PN-ZB02 (optional) is attached, select the audio input terminal to be used in PC D-SUB of AUDIO SELECT on the OPTION menu.

•To use with AV VIDEO (D-SUB), connect the green terminal to the device’s video output.

3. Audio input terminal

•Use an audio cable without resistance.

•When the PN-ZB02 (optional) is attached, set the audio input terminal used for each input mode in AUDIO SELECT on the OPTION menu.

4. Audio output terminals

•The output sound varies depending on the input mode.

•The volume of the output sound can be fixed by setting AUDIO OUTPUT(RCA) on the OPTION menu.

•It is not possible to control the sound output from the audio output terminals with the AUDIO menu.

5.RS-232C output terminal

6.RS-232C input terminal

•You can control the monitor from a PC by connecting a commercially available RS-232 straight cable between these terminals and the PC.

•When using the PN-ZR01 control kit (optional) to perform operation of multiple monitors with the remote control unit, connect multiple monitors in a daisy chain using the commercially available RS-232 straight cable. (See page 14.)

7. Control kit terminal

•Connects the remote control sensor box of the PN-ZR01 control kit (optional). (See page 14.)

■Connection when the PN-ZB02 (optional) is attached

The PN-ZB02 expansion board (optional) allows the use of additional connection terminals.

8. PC/AV DVI-D input terminal

•Set DVI of INPUT SELECT on the OPTION menu according to the device to be connected.

•Select the audio input terminal to be used in PC DVI-D or AV DVI-D of AUDIO SELECT on the OPTION menu.

9. PC/AV DVI-D output terminal

•The video of the PC/AV DVI-D input can be output to an external device.

•Outputting HDCP-encrypted video requires an external device which supports HDCP.

•This terminal allows the daisy chain connection of up to 5 monitors.