Sharp PN-V602 operation manual 47 E, Controlling with a PC, Controlling the Monitor with a PC LAN

Page 47

7. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”.

To set the address manually, set this to “OFF”.

IP ADDRESS

If the DHCP CLIENT is set to “OFF”, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to “OFF”, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to “OFF”, specify the default gateway.

If you are not using a default gateway, specify “0.0.0.0”.

8.When the setting is changed, click [Apply].

9.Check the message and click [OK].

10.Exit Internet Explorer.

11.Restore the PC’s IP address jotted in Step 6, “(2) Specifying the PC’s IP address”.

12.Connect the monitor and the PC to the LAN.

Caution

•Wait 10 seconds after clicking [OK] before proceeding.

•When operating using the remote control unit or similar, click [Refresh].

TIPS

•When manually setting the IP address, the IP address for secondary monitors connected by RS-232C can be automatically allocated. (See page 25.)

Controlling the Monitor with a PC (LAN)

Controlling with a PC

■ Basic operation

You use Internet Explorer on a PC on the LAN to control the monitor.

1.Launch Internet Explorer on the PC.

2.In the “Address” box, type “http://” followed by your monitor’s

IP address followed by “/”, then press the Enter key.

You can confirm the IP address with the DISPLAY function.

When prompted to enter a user name and password, type the user name and password that you specified in the security settings (see page 49), and click [OK].

If you did not make any security settings, leave the spaces blank and click on [OK].

3.You can check, control, and change the monitor’s status and settings by clicking the menu items on the left side of the screen.

•If you see an [Apply] button next to a setting, click it after you change that setting.

TIPS

•See pages 48 to 52 for details on each setting.

•If you click [Refresh] before the screen finishes updating the current display, the “Server Busy Error” will appear. Wait for a moment before operating your monitor again.

•You cannot operate the monitor while it is warming up.

•If “DHCP CLIENT” is set to “ON”, press DISPLAY on the remote control unit two times and then check the monitor’s IP address.

47 E

Page 46 Page 48
Image 47
Page 46 Page 48
Contents PN-V602 Brown For Customers in U.KGREEN-AND-YELLOW BlueImportant Information Refer Servicing to Qualified Service PersonnelOther Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionDear Sharp Customer Safety Precautions Fan in this product has a limited lifetime Use only the power cord supplied with the monitorRear side buttons Remote control unit buttons Mounting Precautions Supplied Components ContentsNRear view Part NamesNFront view 11 E Connection when the PN-ZB02 optional is attached Connecting Peripheral EquipmentConnection with video cable Connecting Peripheral Equipment13 E Multiple monitor connectionSet the ID No Connection with the control kit optionalConnect the monitors in order Remote control operation range Preparing the Remote Control UnitConnecting the Power Cord Installing the batteriesBe sure the handles are attached securely Binding CablesRemoving the Handles Affixing the Protection CoversDisabling power on/off operations Turning Power On/OffTurning on the main power Turning power on/offMute Input Input mode selectionVOL +/- Volume adjustment Basic OperationDisplay 19 EBasic Operation Cut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotSpecified Monitor Remote Control Mode21 E This Monitor onlyNMenu screen display Menu ItemsDisplaying the menu screen NExample of operationMenu Items NPICTURE 23 EMenu item details NSCREENNAUDIO NSETUPMenu Items 25 E Menu Items NOPTION Menu Items NPIP/PbyP 27 ENMULTI PIP Menu Items NDual screen displayNEnlarge NSCHEDULE NZOOM2 Special Setting29 E NScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 31 E Communication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connectionNCommunication interval 33 EAdvanced operation NCommands for ID controlControlling the Monitor with a PC RS-232C NID numbersOK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 35 ENRepeater control VOLM0020 ←NActivating the Gamma user data Setting of the Gamma user dataNTo transfer the Gamma user data NSaving the Gamma user data37 E RS-232C command tablePower control/Input mode selection How to read the command tableControlling the Monitor with a PC RS-232C Screen menu Controlling the Monitor with a PC RS-232C Picture menu 39 EControlling the Monitor with a PC RS-232C Audio menu Setup menuControlling the Monitor with a PC RS-232C Option menu 41 EHorizontal orientation Vertical orientation Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu43 E Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 45 EControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Controlling the Monitor with a PC LAN 47 EControlling with a PC Information about this monitor appears Standby mode, Power on is the operation availableAccept IP Address User Name / Password49 E DNS ServerMonitor Name Installation Information NAME/LOCATIONAuthentication Account Name / PasswordConfirmation 51 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error53 E TroubleshootingTroubleshooting 55 E SpecificationsNPN-V602 Product Specifications NPN-ZR01 optional Product SpecificationsSet to ensure maximum power consumption. See Specifications NDimensional DrawingsNPower management NPOWER Limited See57 E Specifications NCompatible signal timing PCSpecifications NCompatible signal timing AV 59 E PN-V602 Me EN11H1
Related manuals
Manual 28 pages 8.65 Kb Manual 60 pages 23.69 Kb
Top Page Image Contents