Sharp PN-V602 operation manual Safety Precautions

Page 6

SAFETY PRECAUTIONS (Continued)

19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

Use the specified batteries only.

Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment.

Do not mix old and new batteries.

Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.

Replace an exhausted battery with a new one promptly.

If you will not use the remote control for a long time, remove the batteries.

If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye.

20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.

21. Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperature burns.

WARNING:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: PC/AV DVI-D output terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal, PC D-SUB input terminal, PC RGB input terminals, and RS-232C input/output terminals.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using fixing devices like wall mount brackets recommended by the manufacturer.

Only using furniture that can safely support the monitor.

Ensuring the monitor is not overhanging the edge of the supporting furniture.

Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.

Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

Especially for child safety

-Don’t allow children to climb on or play with the monitor.

-Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.

-Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

-Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by curious children.

E6

Image 6
Contents PN-V602 Blue For Customers in U.KGREEN-AND-YELLOW BrownRefer Servicing to Qualified Service Personnel Important InformationEuropean Union Information on Disposal for Users private householdsInformation on Disposal for Business Users Other Countries outside the EUDear Sharp Customer Safety Precautions Use only the power cord supplied with the monitor Rear side buttons Remote control unit buttonsFan in this product has a limited lifetime Mounting Precautions Contents Supplied ComponentsPart Names NFront viewNRear view 11 E Connecting Peripheral Equipment Connection when the PN-ZB02 optional is attachedMultiple monitor connection Connecting Peripheral Equipment13 E Connection with video cableConnection with the control kit optional Connect the monitors in orderSet the ID No Installing the batteries Preparing the Remote Control UnitConnecting the Power Cord Remote control operation rangeAffixing the Protection Covers Binding CablesRemoving the Handles Be sure the handles are attached securelyTurning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operationsBasic Operation Input Input mode selectionVOL +/- Volume adjustment Mute19 E Basic OperationDisplay Dot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut offThis Monitor only Remote Control Mode21 E Specified MonitorNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayNSCREEN 23 EMenu item details Menu Items NPICTURENSETUP Menu ItemsNAUDIO 25 E Menu Items NOPTION 27 E NMULTIMenu Items NPIP/PbyP Menu Items NDual screen display NEnlargePIP NZOOM2 Special Setting 29 ENSCHEDULE Adjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 31 E PC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditions33 E NCommunication intervalNID numbers NCommands for ID controlControlling the Monitor with a PC RS-232C Advanced operationVOLM0020 ← 35 ENRepeater control OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←NSaving the Gamma user data Setting of the Gamma user dataNTo transfer the Gamma user data NActivating the Gamma user dataHow to read the command table RS-232C command tablePower control/Input mode selection 37 EControlling the Monitor with a PC RS-232C Screen menu 39 E Controlling the Monitor with a PC RS-232C Picture menuSetup menu Controlling the Monitor with a PC RS-232C Audio menu41 E Controlling the Monitor with a PC RS-232C Option menuImage Position Epos setting Controlling the Monitor with a PC RS-232C Multi menuHorizontal orientation Vertical orientation Initialization/Functional Restriction Setting Function menu 43 EControlling the Monitor with a PC RS-232C PIP/PbyP menu Commands for setting of the Gamma user data Controlling the Monitor with a PC RS-232C Others45 E Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitorDefault Gateway 0.0 Controlling the Monitor with a PC LAN To set from a PC47 E Controlling with a PCControlling the Monitor with a PC LAN Standby mode, Power on is the operation available Information about this monitor appearsDNS Server User Name / Password49 E Accept IP AddressAccount Name / Password Installation Information NAME/LOCATIONAuthentication Monitor NameCondition 51 ERecipient E-MAIL Addresses ConfirmationTrap Setting of Authentication Error Snmp SettingTrap Setting VersionTroubleshooting 53 ETroubleshooting NPN-ZR01 optional Product Specifications SpecificationsNPN-V602 Product Specifications 55 ENPOWER Limited See Specifications NDimensional DrawingsNPower management Set to ensure maximum power consumption. SeeSpecifications NCompatible signal timing PC 57 ESpecifications NCompatible signal timing AV 59 E PN-V602 Me EN11H1
Related manuals
Manual 28 pages 8.65 Kb Manual 60 pages 23.69 Kb