Sharp PN-V602 operation manual Menu Items NOPTION

Page 26

Menu Items

nOPTION

DATE/TIME SETTING

Set the date and time. Press or to select the date

and time, and press or to change the numerical values.

Set the date in “Day/Month/Year” order.

Set the time on a 24-hour basis. (Factory default)

DATE/TIME FORMAT

Sets the date/time display format.

DATE

MM/DD/YYYY

 

DD/MM/YYYY

 

YYYY/MM/DD

 

(YYYY: Year, MM: Month, DD: Day)

TIME

Select 12- or 24-hour time.

SCHEDULE (See page 29.)

You can turn the power on/off and change the screen brightness at a specified time.

INPUT SELECT

Select the input mode to be used in PC D-Sub input terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal and PC RGB/AV component input terminals.

For D-SUB, select SET after selecting the input mode, and

then press MENU .

D-SUB and BNC cannot be set to AV COMPONENT at the same time.

If D-SUB is set to AV VIDEO, the AV VIDEO input terminal cannot be used for BNC.

AUDIO SELECT

Selects the terminal used to input audio signals in each input mode.

INPUT SIGNAL (PC D-SUB/PC RGB)

If a computer connected to the PC D-sub/PC RGB input terminal outputs any of the following resolutions, make a selection from the following options.

480 LINES

AUTO, 640x480 or 848x480

768 LINES

AUTO, 1024x768, 1280x768, 1360x768 or

 

1366x768

1050 LINES

1400x1050 or 1680x1050

ZOOM2 SPECIAL SETTING (See page 29.)

SCAN MODE (AV input)

Sets the scan mode used for AV mode input.

MODE1

Over-scan display

MODE2

Under-scan display

MODE3

Under-scan display when the input signal

 

is 1080i/p. Otherwise, over-scan display

POWER MANAGEMENT

POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode.

COLOR SYSTEM (AV S-VIDEO/AV VIDEO)

Select the color system of the AV equipment which is connected to AV S-video and AV video input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43)

When AUTO is selected, the color system is automatically set according to the input signal.

AUDIO OUTPUT(RCA)

Sets the volume of sound output from the audio output terminals. When set to VARIABLE2, audio is not output from the external speaker terminals.

VARIABLE

You can adjust the volume using VOLUME.

FIXED

Disables volume adjustment and fixes the

 

sounds.

When the PN-ZB02 (optional) is attached:

VARIABLE1

You can adjust the volume using VOLUME.

VARIABLE2

You can adjust the volume using VOLUME,

 

but audio is not output from the external

 

speaker terminals.

FIXED

Disables volume adjustment and fixes the

 

sounds.

AUDIO LEVEL(STEREO MINI)

Selects the maximum audio input level of the audio input terminal.

SELF ADJUST

On a PC D-SUB/PC RGB screen, specify whether to perform screen adjustment automatically or not. When ON is selected, the screen is automatically adjusted when its resolution is 800 x 600 or higher and the timing of input signals changes. “ADJUSTING” appears on the screen during the adjustment. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.)

AUTO INPUT CHANGE

Specify whether to change inputs automatically. When ON is selected and no signal is present in the selected input mode, AUTO INPUT CHANGE automatically changes the selected mode to another mode where a video signal is present.

When video signals exist in multiple input modes, the switching priority is as follows:

PC D-SUB, PC HDMI, AV HDMI, AV COMPONENT and AV VIDEO

When the PN-ZB02 (optional) is attached:

PC DVI-D, PC HDMI, PC D-SUB, PC RGB, AV DVI-D, AV HDMI, AV COMPONENT, AV S-VIDEO and AV VIDEO (Input mode switching may take 15 seconds or more, depending on the connected equipment. Input signals may not be detected properly and a priority may change, depending on the connected equipment or video signals.)

FAN SPEED

Sets the rotation speed of the fan.

As this number increases, the rotation speed becomes faster. When set to AUTO, the rotation speed of the fan will change depending on the internal temperature.

SIZE

Selects screen size. (See page 20.)

MUTE AUDIO

Can temporarily turn off the volume.

INFORMATION

If you press , monitor information can be checked.

E26

Image 26
Contents PN-V602 Blue For Customers in U.KGREEN-AND-YELLOW BrownRefer Servicing to Qualified Service Personnel Important InformationEuropean Union Information on Disposal for Users private householdsInformation on Disposal for Business Users Other Countries outside the EUDear Sharp Customer Safety Precautions Fan in this product has a limited lifetime Use only the power cord supplied with the monitorRear side buttons Remote control unit buttons Mounting Precautions Contents Supplied ComponentsNRear view Part NamesNFront view 11 E Connecting Peripheral Equipment Connection when the PN-ZB02 optional is attachedMultiple monitor connection Connecting Peripheral Equipment13 E Connection with video cableSet the ID No Connection with the control kit optionalConnect the monitors in order Installing the batteries Preparing the Remote Control UnitConnecting the Power Cord Remote control operation rangeAffixing the Protection Covers Binding CablesRemoving the Handles Be sure the handles are attached securelyTurning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operationsBasic Operation Input Input mode selectionVOL +/- Volume adjustment MuteDisplay 19 EBasic Operation Dot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut offThis Monitor only Remote Control Mode21 E Specified MonitorNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayNSCREEN 23 EMenu item details Menu Items NPICTURENAUDIO NSETUPMenu Items 25 E Menu Items NOPTION Menu Items NPIP/PbyP 27 ENMULTI PIP Menu Items NDual screen displayNEnlarge NSCHEDULE NZOOM2 Special Setting29 E NScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 31 E PC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditions33 E NCommunication intervalNID numbers NCommands for ID controlControlling the Monitor with a PC RS-232C Advanced operationVOLM0020 ← 35 ENRepeater control OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←NSaving the Gamma user data Setting of the Gamma user dataNTo transfer the Gamma user data NActivating the Gamma user dataHow to read the command table RS-232C command tablePower control/Input mode selection 37 EControlling the Monitor with a PC RS-232C Screen menu 39 E Controlling the Monitor with a PC RS-232C Picture menuSetup menu Controlling the Monitor with a PC RS-232C Audio menu41 E Controlling the Monitor with a PC RS-232C Option menuHorizontal orientation Vertical orientation Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu43 E Commands for setting of the Gamma user data Controlling the Monitor with a PC RS-232C Others45 E Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitorDefault Gateway 0.0 Controlling the Monitor with a PC LAN To set from a PCControlling the Monitor with a PC LAN 47 EControlling with a PC Standby mode, Power on is the operation available Information about this monitor appearsDNS Server User Name / Password49 E Accept IP AddressAccount Name / Password Installation Information NAME/LOCATIONAuthentication Monitor NameCondition 51 ERecipient E-MAIL Addresses ConfirmationTrap Setting of Authentication Error Snmp SettingTrap Setting VersionTroubleshooting 53 ETroubleshooting NPN-ZR01 optional Product Specifications SpecificationsNPN-V602 Product Specifications 55 ENPOWER Limited See Specifications NDimensional DrawingsNPower management Set to ensure maximum power consumption. SeeSpecifications NCompatible signal timing PC 57 ESpecifications NCompatible signal timing AV 59 E PN-V602 Me EN11H1
Related manuals
Manual 28 pages 8.65 Kb Manual 60 pages 23.69 Kb