Sharp PN-V602 37 E, RS-232C command table, Power control/Input mode selection, Standard

	Controlling the Monitor with a PC (RS-232C)
RS-232C command table
How to read the command table
Command:	Command field (See page 32.)
Direction:	W When the “Parameter” is set in the parameter field (see page 32), the command functions as described
	under “Control/Response Contents”.
	R The returned value indicated under “Reply” can be obtained by setting “????”, “	?” or “???+”
	(repeater control) in the parameter field (see page 32).
Parameter:	Parameter field (See page 32.)
Reply:	Response (Returned value)
*1:	“●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE
	setting.
	“○” indicates a command which can also be used in power standby mode when STANDBY MODE is set to
	STANDARD.
	“–” indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.
*2:	PN-ZB02 (optional) limitations
	(A) When PN-ZB02 (optional) is not attached, (B) When PN-ZB02 (optional) is attached.
	○ : The command can be used.
	- : Error (ERR)

Power control/Input mode selection

Function	Command	Direction	Parameter		Reply	Control/Response contents	*1		*2
				(A)				(B)
POWER CONTROL	POWR	W		0		Switches to standby mode.
				1		Returns from standby mode.	●	○		○
		R			0	Standby mode
					1	Normal mode
					2	Input signal waiting mode
INPUT MODE SELECTION	INPS	W		0		Toggle change for input mode. Terminals not selected in INPUT SELECT		○		○
						cannot be selected.
				1		PC DVI-D		-		○
						“ERR” when AV DVI-D is selected for DVI of INPUT SELECT.
				2		PC D-SUB		○		○
						“ERR” when other than PC D-SUB is selected for D-SUB of INPUT
						SELECT.
				3		AV COMPONENT (BNC)/AV COMPONENT (D-SUB)
						“ERR” when other than PC RGB is selected for BNC of INPUT SELECT,		○		○
						and when other than AV COMPONENT is selected for D-SUB of INPUT
						SELECT.	●
				4		AV VIDEO (BNC)/AV VIDEO (D-SUB)		○		○
				6		PC RGB		-		○
						“ERR” when AV COMPONENT is selected for BNC of INPUT SELECT.
				7		AV DVI-D		-		○
						“ERR” when PC DVI-D is selected for DVI of INPUT SELECT.
				8		AV S-VIDEO		-		○
				9		AV HDMI		○		○
						“ERR” when PC HDMI is selected for HDMI of INPUT SELECT.
				10		PC HDMI		○		○
						“ERR” when AV HDMI is selected for HDMI of INPUT SELECT.
		R			1	PC DVI-D
					2	PC D-SUB
					3	AV COMPONENT
					4	AV VIDEO	●	○		○
					6	PC RGB
					7	AV DVI-D
					8	AV S-VIDEO
					9	AV HDMI
					10	PC HDMI

37 E