Sharp XL-UH220H operation manual For, AC power connection, Demonstration mode, External FM aerial

XL-UH220HSystem connections (continued)

AC power connection

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode.

		ANTENNA
		VIDEO/AUX IN
		RIGHT	LEFT
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT		SUBWOOFER OUT-PRE
RIGHT	LEFT

Use	Wall socket
	(AC 230 - 240V, 50 Hz)
for	Note:
	Unplug the AC power lead from the wall socket if the unit will not
Preparation	be in use for a prolonged period of time.
	Cooling fan:
	The main unit is built with a cooling fan at the rear of the unit for im-
	proved cooling. Please do not cover the opening of the fan with any
	obstacles, as this will block proper ventilation.

ANTENNA

		VIDEO/AUX IN
		RIGHT	LEFT
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT		SUBWOOFER OUT-PRE
RIGHT	LEFT

10

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode: When the unit is in the power stand- by mode (demonstration mode), press the X-BASS/DEMO button on the remote control. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/ DEMO button on the remote control again.

Note:

When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.

External FM aerial

Use an external FM aerial if you require better reception. Consult your dealer.

ANTENNA

FM GND AM

External

FM aerial

75 OHMS

75 ohms coaxial cable

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.