Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and Earth (GND) terminals. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Speaker connection
Connect the black wire to the minus
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
SPEAKERS
RIGHT LEFT
AC INPUT
Red 
Black
Caution:
Use speakers with an impedance of 6 ohms or impedance speakers can damage the unit.
more, as lower
Use
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT LEFT
ANTENNA
FM | GND AM |
ANTENNA
VIDEO/AUX IN
RIGHT LEFT
75 OHMS SUBWOOFER 
Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may be injured.
Speaker grilles are removable
SPEAKERS | |
| IMPEDANCE: |
RATED SPEAKER . | |
| S MIN |
6 OHM | |
RIGHT | LEFT |
| |
Incorrect
Preparation for
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial: |
|
< Assembling > | < Attaching to the wall > |
Make sure nothing comes into contact with the speaker diaphragm when you remove the speaker grilles.
Wall Screws (not supplied)
9