Sharp XL-UH220H operation manual Sleep operation, To confirm the remaining sleep time

Sleep operation

The radio, compact disc and USB can all be turned off automatically.

1Play back the desired sound source.

2Press the CLOCK/TIMER button.

3Within 10 seconds, press the

or button to select "SLEEP", and press the MEMORY button.

4Press the or button to select the time. (Maximum: 3 hours - Minimum: 1 minute)

3 hours - 5 minutes 5-minute intervals 5 minutes - 1 minute 1-minute intervals

5Press the MEMORY button.

"SLEEP" will appear.

6The unit will enter the power stand-by mode automatically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep op- eration finishes.

To confirm the remaining sleep time:

1Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select "SLEEP

X : XX".

"X : XX" is sleep remaining time.

The remaining sleep time is displayed for about 10 seconds. You can change the remaining sleep time whilst it is displayed by pressing the MEMORY button (steps 4 - 5).

XL-UH220H

To cancel the sleep operation:

Press the ON/STAND-BY button whilst "SLEEP" is indicated.

To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.

1Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select "SLEEP OFF", and press the MEMORY button.

		To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up						Features
to CD in the next morning.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback (steps 2 -
		10, pages 32 - 33).				Advanced
	Sleep timer setting		Timer playback setting		End time
		1 minute - 3 hours			Desired time
		Sleep operation will		Timer playback start time
		automatically stop.

35